Invisilights
Permanent Holiday Lighting
Customizable Lights for Any Event
This should include footage of lights and channel along with any Extensions or jumps you'll need to make
This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.
What Voltage system you want to use 24V or 36V
This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.
By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.
take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:
System Voltage: 36V
Color of channel: Cameo
Channel Type: Hat
Total Lighted Footage: 160'
Power injection: NO
Controller: 1
Channel: 27- 6' sticks
Screws- 200
Lights: 175
1' extensions-7
6' Extensions-2
12' extensions-2
25- extensions- 1
Y Cables- 3
End caps- pack of 10
-Controller
-Lights
-Channel
-Screws
-Extension cables
-Y Cable
-End Caps
- Signal boosters
-Power injection material
The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.
Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)
Materials needed for power injection 36V
Power injection pig female pig tale
Power injection Extension cables
Power injection T Cable.
Materials needed to Power inject 24V
16/2 - 12/2 Low voltage landscaping wire
Cut and Splice T cable
Water Proof Wire connectors
Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.
Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.
Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.
Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.
Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.
The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:
27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.
150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.
2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.
A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.
1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.
1 Controller that allows you to manage and customize the lighting effects easily.

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:
Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.
Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.
Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:
Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.
RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.
Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.
Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.
GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.
Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.
The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

How long do Invisilights last?
Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

What types of custom channels are available?
Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.
Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.
Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions


Nearly 80% of Americans decorate their homes for the holidays, and a significant decision you'll face is whether to use C7 or C9 Christmas lightbulbs. These two sizes might look similar at a glance, but they serve distinct purposes and create different visual effects. If you're aiming to strike the perfect balance between cozy and conspicuous in your holiday decorations, understanding the nuances between C7 and C9 bulbs is crucial. From the impact on your home's facade to the subtleties of energy consumption, we'll guide you through making an informed choice that aligns with your festive vision. Stick around to uncover which bulb type will best illuminate your holiday spirit.

When choosing between C7 and C9 Christmas lightbulbs, it's crucial to consider the size of the area you're decorating. C7 bulbs, being smaller, are your go-to for tinier spaces. Imagine wrapping a quaint Christmas tree or decking out a small balcony. These bulbs shine without overwhelming, offering a cozy, nostalgic glow. Their compact size doesn't just mean they fit better in limited spaces; it also means they're a bit easier to handle and install. You're looking at less weight per bulb and, consequently, less strain on whatever you're attaching them to.
On the flip side, if you're aiming to make a statement on a grander scale, C9 bulbs are your allies. Think large outdoor trees, the eaves of your home, or even outlining your driveway. These larger bulbs stand out from a distance, their size making them the preferred choice for exterior holiday decorating. Because they cover more area per bulb, you might find you need fewer strands to achieve your desired effect. This can be a relief when it comes to setup and teardown.
However, don't forget to weigh in the electrical aspect. Larger bulbs like C9s might pull more power, so if you're decking out a vast area, ensure your electrical setup can handle the load. You wouldn't want to trip a breaker mid-celebration.

How do C7 and C9 bulbs compare in terms of brightness and overall appearance for your holiday decorations? Well, if you're aiming for a dazzling display that catches the eye from a distance, you'll find C9 bulbs are your go-to choice. They're larger and pack a brighter punch, making them perfect for lighting up the exterior of your home. Their higher wattage and lumen output mean that your holiday setup won't just be seen; it'll be admired from far and wide.
On the other hand, if you're decorating a smaller space or aiming for a subtler glow, C7 bulbs will suit your needs beautifully. They provide a softer light that's ideal for cozy indoor areas or a small outdoor display. Their traditional appearance brings a classic holiday feel to any setup, ensuring your decorations have a warm and inviting glow.
Both C7 and C9 bulbs offer a traditional look that can make your holiday decorations feel timeless. The choice between them often comes down to the desired brightness and the size of the area you're decorating. Larger, brighter C9 bulbs are unmatched for visibility and impact in expansive outdoor settings. Meanwhile, C7 bulbs excel in creating a more intimate ambiance, perfect for indoor trees or smaller outdoor areas.

Shifting focus to energy efficiency, it's crucial to note that C7 bulbs are more energy-efficient than their C9 counterparts, making them a cost-effective choice for your holiday lighting.
When you're deciding between C7 and C9 bulbs, it's not just about the size or the brightness; how much energy they consume is a significant factor. C7 bulbs, being smaller, naturally consume less power. Typically, a C7 bulb uses about 5 to 10 watts of energy, whereas a C9 bulb, due to its larger size and higher brightness, uses about 7 to 10 watts. This difference might seem small, but it adds up quickly, especially if you're decking out your entire home or a large outdoor area.
Moreover, if you're leaning towards LED options, the gap in energy efficiency widens even further. LED C7 bulbs consume significantly less electricity than their traditional incandescent counterparts and even less than LED C9 bulbs. This means you can enjoy a brightly lit home or yard for the holidays without worrying about a spike in your energy bill.
Choosing C7 bulbs for your holiday decorations isn't just a smart choice for your wallet; it's also a more sustainable option. Lower energy consumption means a smaller carbon footprint, making C7 bulbs the greener choice for environmentally conscious decorators.

Before you dive into hanging your holiday lights, it's essential to plan your installation strategy carefully. Measure the area you're decorating to figure out how many strands you'll need. It's a bummer to start stringing lights only to realize you're short by just a few feet. So, take that tape measure out and get a precise length of your space.
Next, you'll want to make sure you're using outdoor-grade extension cords if your lights are going outside. These cords are designed to withstand the elements, ensuring your lights stay bright throughout the season. And always follow safety guidelines to prevent any electrical mishaps.
Before you start climbing ladders or scaling roofs, test your lights. There's nothing more frustrating than meticulously hanging your lights, stepping back to admire your work, and noticing that half of them aren't lighting up. Plug each strand in and give it a quick check before hanging.
When it's time to hang your lights, opt for clips or hooks specifically designed for light installation. They make the job easier and prevent damage to your home or the light strands. Plus, they're relatively inexpensive and can be reused year after year.
Having covered how to properly install your holiday lights, let's now explore the pros and cons of C7 and C9 Christmas lightbulbs to help you make the best choice for your festive display.
You've got to consider the size of your space when choosing between C7 and C9 bulbs. If you're lighting up a large area, like the exterior of your home, C9s are your go-to with their larger size and brighter light. They're perfect for making a bold statement. However, they do use about 20% more electricity than C7s, which could bump up your energy bill during the holiday season.
On the flip side, C7 bulbs are more energy-efficient and ideal for smaller displays, like decorating your Christmas tree or lighting up a cozy indoor space. They provide a classic, traditional look with a softer glow that won't overwhelm smaller areas. But, if you're aiming to light up a large outdoor space, they might not cut it due to their smaller size and lower brightness.
Both types offer a wide variety of color options, allowing you to customize your holiday décor to match your style. Yet, it's important to note that C9 bulbs can be more expensive upfront and are heavier and bulkier, which might make installation a tad more challenging.

You're wondering if you can mix C7 and C9 bulbs on the same light strand. Generally, it's not recommended. These bulbs have different sizes and electrical requirements, meaning they won't fit in the same socket type. C7s are smaller and use less energy, while C9s are larger and brighter but consume more electricity. To keep your display safe and efficient, stick to one type per strand. Always check compatibility before mixing.
Weather conditions greatly impact your C7 and C9 bulbs' durability and lifespan. Extreme temperatures, rain, and snow can wear them down faster. If you're in an area with harsh weather, it's crucial to choose bulbs designed for outdoor use. They're made to withstand the elements better. Remember, keeping them dry and avoiding extreme cold or heat when storing will also help extend their life. So, don't overlook the weather's role!
Imagine you're planning a dazzling light display. You're in luck because both C7 and C9 light options come in smart or programmable versions. These allow for customized displays that can dance to music or change colors with an app on your phone. You can create a show that'll be the talk of the neighborhood. Just remember, these advanced features might cost a bit more, but they're worth it for the wow factor.

When planning your holiday lighting, it's vital to consider how C7 and C9 bulbs affect your electrical load. C9 bulbs draw more power, increasing the risk of overloading circuits. To prevent this, calculate the total wattage of your lights and compare it to your electrical system's capacity. Always use outdoor-rated extension cords and avoid daisy-chaining too many strands together. This approach ensures a bright, safe holiday display.
Imagine wrapping your home in a warm glow, but once the season's over, you're left wondering about the bulbs' fate. When disposing or recycling C7 and C9 bulbs, consider their environmental impact. You can't just toss them in the trash; many regions require special disposal or recycling due to potential hazards. C7 bulbs, being smaller, might seem less of a worry, but both types demand responsible handling to minimize environmental harm.

In the grand tapestry of holiday decorations, the choice between C7 and C9 bulbs is akin to selecting between twinkling stars and the full moon's glow. You'll find C7s to be the cozy whispers of light, perfect for intimate nooks, while C9s roar with luminosity, claiming the night. Energy-wise, they both dance gracefully, albeit with a slight nod to C7s for the budget-conscious. Installation is a breeze, painting your abode in hues of joy. In essence, whether you choose the subtle elegance of C7s or the bold statement of C9s, your home will bask in holiday splendor, turning heads and warming hearts in equal measure. For more information on the types of lights and strings, see our blog post "Understanding Christmas Lights Terminology".
Terms of Service / Privacy Policy
Have questions or need assistance?
Contact us at (855)619-LITE