Invisilights

Permanent Holiday Lighting

Customizable Lights for Any Event

invisilights 100 foot permanent light kit

Permanent Christmas Lights 24V Kit

invisilights 150' permanent light kit

Permanent Christmas Lights 36V Kit

Permanent light demo kit

Permanent Christmas Lights

Demo Kit

WHAT YOU NEED TO KNOW BEFORE ORDERING

Total Linear footage of the installation.

This should include footage of lights and channel along with any Extensions or jumps you'll need to make

Where your controller box will be located

This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.

What Voltage system you want to use 24V or 36V

This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.

Draw a Map

By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.

take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:

System Voltage: 36V

Color of channel: Cameo

Channel Type: Hat

Total Lighted Footage: 160'

Power injection: NO

Controller: 1

Channel: 27- 6' sticks

Screws- 200

Lights: 175

1' extensions-7

6' Extensions-2

12' extensions-2

25- extensions- 1

Y Cables- 3

End caps- pack of 10


Absolute necessities

-Controller

-Lights

-Channel

-Screws

-Extension cables


Other Accessories

-Y Cable

-End Caps

- Signal boosters

-Power injection material


When would you need to power inject?

The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.

Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)

Materials needed for power injection 36V

Power injection pig female pig tale

Power injection Extension cables

Power injection T Cable.


Materials needed to Power inject 24V

16/2 - 12/2 Low voltage landscaping wire

Cut and Splice T cable

Water Proof Wire connectors

Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions

Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.

Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.

Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.

Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.

Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.

Frequently Asked Questions

What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?

The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:

  • 27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.

  • 150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.

  • 2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.

  • A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.

  • 1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.

  • 1 Controller that allows you to manage and customize the lighting effects easily.

FAQ image

Will I need any additional components besides what's included in the Invisilights permanent lighting kit?

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:

Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.

Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.

Can I choose the color of the aluminum channel for my InvisiLights kit?

Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

FAQ image

How do the included components of the InvisiLights kit enhance the lighting system?

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:

Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.

RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.

Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.

Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.

GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.

Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

FAQ image

Can I use Invisilights year-round?

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

FAQ image

Can I set timers and events for Invisilights?

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

FAQ image

Is it possible to achieve warm or soft white with Invisilights?

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

FAQ image

How do you ship your product?

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.

Where are the controller and power supplies installed?

The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

FAQ image

How long do Invisilights last?

Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

FAQ image

Are Invisilights dimmable?

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

FAQ image

What types of custom channels are available?

Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.

FAQ image

Can I control different zones independently?

Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

FAQ image

What is outdoor permanent lighting?

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.

How does permanent lighting differ from traditional holiday lighting?

Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions

FAQ image

Discover Expert Tips on Our Blog

selling the Christmas lights bulbs magic not the bulbs

You Can't Get $8 A Foot Because You're Selling Bulbs

October 04, 2026•14 min read

You just walked off a job where the homeowner told you $8 a foot was crazy. Three other installers quoted $6. Now you're wondering if premium pricing only works on the other side of the country.

It doesn't. Installers in Dallas and the St. Louis area are closing jobs at $8 to $12 a foot right now. The difference between them and the $6-a-foot crowd has almost nothing to do with the market, and almost everything to do with what they believe, what they sell and how they sell it.

Quick Answer: Professional Christmas light installers are closing jobs at $8–$12 per linear foot in markets where others insist $6 is the limit, including Dallas and the St. Louis area. The ceiling is rarely the market—it's mindset and selling bulbs instead of the experience. Expect a 15%–30% close rate at premium pricing versus 30%–50% at $6 a foot, but you'll do less work and make more money.

This guide lays out how established installers break through the "not in my area" price ceiling, from mindset to the quote. For the full system, see ChristmasLights.io professional installer training.

Custom HTML/CSS/JavaScript

Is It True You Can't Charge $8–$12 a Foot in Your Market?

No. "You can't get that in my area" is one of the most common objections in the Christmas lights business, and it almost never survives a look at the installer's own quote.

Consider what's happening in markets people swear are "$6 towns":

  • Dallas: Installers are closing at $8 to $12 a foot and building half-million and million-dollar businesses—in the same city where a widely shared video claims $6 is the ceiling.

  • Outside St. Louis: One installer came to training, changed his mindset about what he could charge and now closes at $8 to $12 a foot.

  • Three-year agreements: Installers in the community are signing three-year contracts at $9 a foot this season.

  • Age is no excuse either: One installer charged $10 a foot and did $125,000 at 17 and 18 years old.

If the market were the problem, none of those numbers could exist. They do, which means the ceiling is somewhere else.

What the "Not in My Area" Quote Usually Looks Like

When an installer insists premium pricing is impossible locally, the fastest diagnosis is to look at the quote. It often reads like a parts invoice: "127 bulbs × $8 per foot." There is nothing on that page about how amazing the home is going to look.

That's a contract, not a vision. There's nothing magical about it, so the homeowner is left comparing price alone—and the installer blames the market for a problem the quote created.

Why Does Your Mindset Set Your Price Ceiling?

Because if you don't believe you're worth $8 to $10 a foot, you'll never be able to sell it at $8 to $10 a foot. You have to believe it and feel it before a homeowner will.

The idea isn't new. A Roman poet wrote some version of it two thousand years ago, and Henry Ford made it famous: whether you think you can or think you can't, you're right. In a Christmas lights business, that belief shows up in dollars.

Who You Listen to Becomes What You Charge

If your feed is full of installers saying "$6 is all this market will bear," you'll absorb it. The next words out of your mouth on a sales call will be theirs. That's why the fastest pricing upgrade many installers make costs nothing: they stop consuming content from people who've accepted a low ceiling and start learning from people closing premium jobs.

Premium Isn't Easy—and That's the Point

Anyone who says this business is easy is selling something. Two pressure washing operators—each a one- or two-person crew—recently closed seven-figure contracts. Neither was the lowest bidder. One followed up for weeks and months before the client said yes. The other had to learn paperwork and processes he'd never touched before.

What they had in common: they put sales first, believed they'd win and kept taking action. The same discipline applies to holiday lighting.

Write the Goal Down and Say It Out Loud

A practical tool from Think and Grow Rich: write a specific revenue target with a date, then read it aloud every morning and every night—with emotion. For example: "I will do $100,000 in Christmas lights by December 31, 2026." When doubt creeps in mid-season, that repetition is what keeps you from dropping your price.

Are You Selling Bulbs or Selling the Magic?

If you sell bulbs, you get bulb prices: $5 to $6 a foot. The $6 installer and the $12 installer both sell the same LED Christmas light bulbs. The customer isn't paying for the bulb—they're paying for how the finished home makes them feel.

The $3 Purse vs. the $3,000 Purse

Two purses can come out of the same factory at the same cost and do exactly the same job. One sells for $3, the other for $3,000. The difference is everything around the product:

$3 purse

$3,000 purse

Where it's sold

Walmart

One store at one mall in the region

Scarcity

20 on the shelf

Hard to find

Service

Security checks you on the way out; nobody shows you the purse

Staff show you how amazing it is

The buyer

Grabbing a commodity

Makeup done, $1,000 in clothes, buying the accessory

Christmas lighting works the same way. Your competitor is selling the left column. Premium installers sell the right one.

What Selling the Magic Sounds Like

Compare two pitches for the same house.

The bulb pitch: "We use the brightest LED bulbs, we'll run the peaks and the ridge, and we point every bulb straight out."

The magic pitch: "When your grandkids pull into the driveway, their faces are going to light up. The whole street will slow down to see this house. Here's a rendering of what it'll look like—can you picture coming home to that every night in December?"

Studies show about 90% of people buy on emotion and how they feel. The first pitch asks a homeowner to compare bulbs. The second asks them to imagine a memory. Only one of those justifies $10 a foot.

Christmas lights magic

How Do Top Installers Actually Sell at Premium Prices?

They control every moment the customer experiences, from the first ring of the phone to the signed proposal. Here's where the $6 and $12 installer split apart.

Look Like a $10-a-Foot Company

Show up in basketball shorts and you'll struggle to get $8 to $10 a foot. Dress nice and look like you own a business—because you do. Age doesn't matter either; young installers win premium work by showing up professional and like they care.

The same rule applies online. If your social media only shows small ranch homes, you'll attract small-ranch budgets. Feature your biggest, most beautiful installs. The customers you showcase are the customers you'll get—and their friends.

Sound Excited on the Phone

If you answer from a roof saying "hold on, let me make sure I don't fall off," you've already lost. Take a breath, smile and answer excited: "Hey, this is [your name]. How can I help you?"

Think of how enthusiastic a certain holiday movie elf gets about spaghetti with syrup. That's the energy. And if you genuinely aren't the best person on your team to answer the phone, hire or assign someone who is. A bad first call can lose the job before a quote exists.

Read the Buyer: DISC and Love Languages

The DISC model sorts people into four styles:

  • D (Dominance): Direct. Wants to get things done.

  • I (Influence): Talks a lot.

  • S (Steadiness): Doesn't want to hear about bulbs or electricity. Buys on emotion.

  • C (Conscientiousness): Analytical.

Roughly 69% of buyers are S profiles. You sell them on emotion—family, kids and how the home will feel—not the bulbs. It also helps to understand the homeowner's love language so you know what matters to them.

Ask the Memory Question

One of the most powerful questions an installer can ask at a walkthrough: "How did your parents decorate when you were growing up?"

It sends the homeowner back to pulling into Grandma's driveway as a kid. Then you tie it forward: "Our goal is for your kids and grandkids to have that same memory of this house." You've stopped quoting footage and started building a legacy.

Build a Quote That Sells the Vision

Replace the line-item invoice with a proposal that shows a rendered picture of their home lit up and speaks to how amazing the house is going to look. At an in-person quote, don't spend 30 minutes talking about bulbs. Spend it on the family and the kids, building know, like and trust.

What Close Rate Should You Expect at $8–$12 a Foot?

Lower than at $6—and that's fine. At $6 a foot you might close 30% to 50%. At $8 to $12 a foot, expect 15% to 30%. You won't close every job, but you'll do less work and make more money.

If your close rate at premium pricing is really low, look at how you're selling first: the phone call, the walkthrough and the quote. Sometimes you may need to come down a little while you learn to sell better. But price is almost never the real objection—unsold value is.

How Do You Raise Your Average Ticket and Protect Profit?

Raise the ticket before you chase more leads. Every dollar added per job lowers the number of homes you need.

Worked Example: The $100,000 Goal

One second-year installer did $33,000 last season and set a $100,000 target. With $25,000 already booked, the plan was 44 more clients at $1,800 each. The better question: how do you get that average ticket to $2,000, $2,200 or $2,500? A higher ticket means fewer jobs to hit the same goal—and more money in the end.

Add-Ons That Lift the Ticket

Ask what else you can sell on every job, not just the roofline:

  • Oversized wreaths: A 60-inch wreath from Sam's Club runs about $199 this season, and installers are getting $300 to $500 apiece. They can be reused for four or five seasons. Pro-grade options up to 72 inches are also available in the commercial Christmas wreaths collection.

  • Ground-stake lighting and ridges: Offer the full package, not just the roofline. Stock up on Christmas light ground stakes and pro Christmas light kits for ridges.

  • Spritzers: Figure out your cost and the time involved, then price accordingly. LED spritzers come in sizes from 12 to 36 inches.

Know Your Real Profit

Most Christmas light companies fail within three to five years for two reasons: the owner never learned to run a business, and they never knew what a job really cost. "I made $100,000 and only spent $20,000" isn't $80,000 of profit if you haven't paid for the labor you did yourself.

A good rule of thumb is thirds: one-third to marketing, materials and costs, one-third to employees and one-third to profit. Pay yourself as labor, then measure what's left. The book Profit First is a good place to start.

Where Do Premium Leads Come From?

From doing more of what already works—at 10 times the volume. A strong close rate at premium pricing means nothing without enough phone calls.

Scale Your Yard Signs

One installer did $16,000 from 100 yard signs, then asked whether to try Facebook or Google Ads next. The better answer: put out 1,000 signs. If you 10x what worked, you have a shot at $160,000 instead of $16,000.

Another installer committed to 2,000 signs in a single season and finished near $400,000. The common mistake is the opposite: installers who win with signs in year one get lazy in year two, switch entirely to paid ads and wonder why the phone went quiet. Signs sitting in a box don't ring the phone. Keep scaling what works, then layer ads on top. Order in volume through ChristmasLights.io professional yard signs.

Christmas lights training and resources

Knock on Doors—Especially Commercial Ones

The hardest door to open is your own car door. One installer walked into local car dealerships this season and closed nearly $10,000 across three or four lots. Another picked one busy road, knocked every door on it for a week and sold 50. Commercial prospects rarely come to you. Go to them.

Post Like a Local Brand on Facebook

If your budget won't cover 1,000 signs yet, post five to seven times a week. Skip the "I'm a Christmas light guy, buy my stuff" posts. Post videos and show different things. As your views go up, people start to know you, and that's how you grow on Facebook. Some installers also light up homes for free—for widows, people who are terminally ill and others who need some Christmas cheer—and use them as training homes before paid installs start.

Your 7-Step Plan to Break the $6-a-Foot Ceiling

  1. Audit your inputs. Stop listening to anyone telling you premium pricing is impossible where you live. Learn from installers who are actually closing at $8–$12 a foot.

  2. Write your number down. Set a revenue goal with a date and say it out loud morning and night.

  3. Rewrite your quote. Show a rendered picture of their home and sell how it will look and feel—not a bulb count.

  4. Upgrade your first impression. Dress professionally, sound excited on the phone and show your best homes on social media.

  5. Sell the memory. Ask how they decorated growing up, read their DISC style and talk family before bulbs.

  6. Raise the ticket. Offer wreaths, ground-stake lighting and ridges on every job.

  7. Scale what works. 10x the lead source that already produced for you—signs, doors or Facebook—before adding anything new.

None of these steps is easy, and none requires a different market. They require action. Get uncomfortable: that's where the growth happens.

Ready to learn the full sales, pricing and marketing system? Start with ChristmasLights.io professional installer training. It's not too late to make this your best season yet.

Frequently asked questions about Christmas lights

How much should a professional Christmas light installer charge per foot?

Many established professional installers charge $8 to $12 per linear foot, and some are signing three-year agreements at $9 a foot. The price you can get depends on how you sell, not your zip code.

Can I really charge $10 a foot in a lower-income or competitive market?

Yes. Installers in markets where others claim $6 is the ceiling, including Dallas and the St. Louis area, are closing at $8 to $12 a foot. The difference is believing your price and selling the experience instead of the bulbs.

Why do homeowners say my Christmas light quote is too expensive?

Usually because the quote gives them nothing to compare except price. A line-item bulb count invites a race to the bottom. A proposal that leads with a rendering of their home and the family experience shifts the comparison from cost to value.

What is a good close rate for Christmas light installation quotes?

At $6 a foot, installers often close 30% to 50%. At $8 to $12 a foot, 15% to 30% is healthy. A lower close rate at a higher price means less work and more money.

What does "sell the magic, not the lights" mean?

It means leading with how the finished home will make the family feel—grandkids' faces lighting up, the neighborhood coming to see the house, a memory they'll keep—rather than bulb type or brightness. About 90% of people buy on emotion and how they feel.

How do I use DISC profiles to sell Christmas lights?

Identify whether the homeowner is direct (D), talkative (I), steady (S) or analytical (C), then match your pitch. Roughly 69% of buyers are S profiles, who buy on emotion and don't care about bulbs or electricity. The sales process is covered in ChristmasLights.io training.

How many yard signs should a Christmas light business put out?

As many as your results justify. If 100 signs produced $16,000, scaling toward 1,000 is the logical next step before adding paid ads. Installers who have committed to 2,000 signs in a season have reached around $400,000 in revenue. Source them through ChristmasLights.io yard signs.

How can I increase my average Christmas light ticket?

Sell more than the roofline: oversized wreaths, ground-stake lighting, ridges and spritzers. A 60-inch Sam's Club wreath costing about $199 can sell for $300 to $500 installed. Raising your average ticket from $1,800 to $2,000 or more means you need fewer jobs to hit your goal.

What profit margin should a Christmas light business target?

A good rule of thumb is thirds: one-third to marketing, materials and costs, one-third to employees and one-third to profit. Count your own labor as a cost. If you'd have to pay someone to do the work you did, that money isn't profit yet.

Is it too late in the season to start or grow a Christmas light business?

No. It's not too late to start a Christmas light business this season, and many installers are just getting ready to start installing. Learn the system through ChristmasLights.io training and connect with other installers in the ChristmasLights.io installer community.

Custom HTML/CSS/JavaScript
christmas light businessChristmas Lights training
blog author image

Jason Geiman

Jason Geiman parlayed his early passion for festive lighting into a thriving Christmas décor installation company which he founded and grew for over 4 years before selling the business in 2018. Now, he draws from his experience scaling a holiday lighting venture to help other Christmas lighting companies maximize their success. Jason feels compelled to share shortcuts he learned running his decoration operation. Jason has made it his mission to enable both residential and commercial clients to execute jaw-dropping lighting displays more easily. He loves experimenting with the latest high-tech LED bulb innovations to incorporate into his instructional programs and resources for those running their own Christmas lighting businesses. After selling his original company, he reinvented himself - driven as ever to spread seasonal magic, but now by helping others grow their holiday lighting ventures successfully. Follow Jason for regular tips on taking your Christmas lights business to the next level!

Back to Blog

Copyright ©2026 All Right Reserved website designed by christmaslights.io

Terms of Service / Privacy Policy

Have questions or need assistance?

Contact us at (855)619-LITE