Invisilights

Permanent Holiday Lighting

Customizable Lights for Any Event

invisilights 100 foot permanent light kit

Permanent Christmas Lights 24V Kit

invisilights 150' permanent light kit

Permanent Christmas Lights 36V Kit

Permanent light demo kit

Permanent Christmas Lights

Demo Kit

WHAT YOU NEED TO KNOW BEFORE ORDERING

Total Linear footage of the installation.

This should include footage of lights and channel along with any Extensions or jumps you'll need to make

Where your controller box will be located

This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.

What Voltage system you want to use 24V or 36V

This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.

Draw a Map

By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.

take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:

System Voltage: 36V

Color of channel: Cameo

Channel Type: Hat

Total Lighted Footage: 160'

Power injection: NO

Controller: 1

Channel: 27- 6' sticks

Screws- 200

Lights: 175

1' extensions-7

6' Extensions-2

12' extensions-2

25- extensions- 1

Y Cables- 3

End caps- pack of 10


Absolute necessities

-Controller

-Lights

-Channel

-Screws

-Extension cables


Other Accessories

-Y Cable

-End Caps

- Signal boosters

-Power injection material


When would you need to power inject?

The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.

Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)

Materials needed for power injection 36V

Power injection pig female pig tale

Power injection Extension cables

Power injection T Cable.


Materials needed to Power inject 24V

16/2 - 12/2 Low voltage landscaping wire

Cut and Splice T cable

Water Proof Wire connectors

Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions

Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.

Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.

Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.

Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.

Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.

Frequently Asked Questions

What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?

The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:

  • 27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.

  • 150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.

  • 2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.

  • A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.

  • 1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.

  • 1 Controller that allows you to manage and customize the lighting effects easily.

FAQ image

Will I need any additional components besides what's included in the Invisilights permanent lighting kit?

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:

Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.

Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.

Can I choose the color of the aluminum channel for my InvisiLights kit?

Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

FAQ image

How do the included components of the InvisiLights kit enhance the lighting system?

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:

Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.

RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.

Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.

Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.

GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.

Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

FAQ image

Can I use Invisilights year-round?

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

FAQ image

Can I set timers and events for Invisilights?

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

FAQ image

Is it possible to achieve warm or soft white with Invisilights?

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

FAQ image

How do you ship your product?

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.

Where are the controller and power supplies installed?

The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

FAQ image

How long do Invisilights last?

Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

FAQ image

Are Invisilights dimmable?

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

FAQ image

What types of custom channels are available?

Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.

FAQ image

Can I control different zones independently?

Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

FAQ image

What is outdoor permanent lighting?

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.

How does permanent lighting differ from traditional holiday lighting?

Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions

FAQ image

Discover Expert Tips on Our Blog

Christmas Lights Business go ime

Christmas Light Business: It's GO TIME (Stop Waiting, Start Winning)

October 15, 202516 min read

The season has officially begun. Across the country, Christmas lights installers are closing jobs, completing installations, and generating significant revenue. Some are doing $10,000-$20,000 per day, while first-year installers are landing their initial contracts and experiencing the thrill of building a real business. The difference between those who succeed and those who stay stuck comes down to one critical factor: taking action versus waiting for perfect conditions.

Custom HTML/CSS/JAVASCRIPT

Winners vs. Waiters: Which One Are You?

There are fundamentally two types of people in the Christmas lights business right now: winners and waiters. Understanding which category you fall into determines whether you'll build a thriving six-figure business or remain stuck making excuses.

The Waiter Mindset

Waiters use specific language patterns that reveal their thinking:

  • "I'm not ready yet"

  • "I hope things work out"

  • "Someday I'll start"

  • "I'm waiting for my logo to be perfect"

  • "I need everything in place first"

These phrases are excuses disguised as planning. Waiters believe they need perfect conditions before launching. They obsess over logos, website details, and equipment specifications while potential customers hire competitors who took action weeks ago.

Consider the cost of waiting. Every day spent perfecting minor details represents lost revenue. Those customers calling competitors today could have been your customers if you'd launched earlier with "good enough" systems rather than waiting for perfection.

The Winner Mindset

Winners operate differently. They:

  • Put out yard signs even if the design isn't perfect

  • Close jobs before they've personally installed a single light

  • Take messy action and learn from failures

  • Start before they feel ready

  • Focus on revenue-generating activities over administrative perfection

Winners understand that you can make things prettier later. You can refine systems, improve marketing materials, and upgrade equipment—but only if you're generating revenue. Perfection is the enemy of progress, and progress is what pays the bills.

Google's automated ranking systems are designed to present helpful, reliable information that's primarily created to benefit people, not to gain search engine rankings. Similarly, your business should focus on serving customers rather than achieving operational perfection that customers never see.

Christmas lights installation business

The Power of Networking in an AI-Driven World

As artificial intelligence becomes more sophisticated, one competitive advantage remains irreplaceable: genuine human relationships. The book "Never Eat Alone" provides a masterclass in networking that becomes increasingly valuable as AI commoditizes technical skills.

Why Networking Matters More Than Ever

With AI, anyone can create professional websites, generate marketing copy, and even produce convincing videos. Technical barriers that once protected established businesses are disappearing. In this environment, relationships become your most defensible competitive advantage.

Successful installers generate $150,000-$200,000 annually from commercial work—almost entirely through networking. These contracts don't come from yard signs or Facebook ads. They result from relationships built over months or years, where decision-makers trust you personally and recommend your services to colleagues.

One installer generated $1.8 million in pressure washing revenue last year, much of it originating from LinkedIn connections that evolved into networking relationships. Initial online contact led to coffee meetings, referrals to friends, and eventually major contracts that would never have come through traditional advertising.

Building a Network That Generates Revenue

Effective networking isn't about collecting business cards at Chamber of Commerce meetings. It's about genuine relationship building where you add value first. Consider these approaches:

LinkedIn for Commercial Opportunities: Many installers overlook LinkedIn, treating it as a resume platform rather than a business development tool. Posting relevant content about holiday lighting, engaging with local business posts, and reaching out to facility managers and property owners can generate $15,000-$20,000 single contracts.

Local Business Relationships: The landscaper with 28 crew members needs someone to handle holiday lighting for his clients. The property management company managing 50 HOAs needs a reliable installer. The event planner coordinating corporate functions needs lighting expertise. These relationships don't form through advertising—they develop through intentional networking.

Referral Partnerships: An irrigation repair business that slows during holidays can send leads your way. In exchange, you refer landscape lighting customers to them during peak season. These mutually beneficial arrangements multiply lead generation without additional marketing costs.

Pricing Confidence: Charging What You're Worth

The single biggest factor limiting installer income is pricing confidence. Many charge $3.50-$6.00 per foot when they could command $8.00-$14.00 or even $20.00 per foot. The barrier isn't market conditions—it's self-belief.

The $6 vs. $8 Per Foot Reality

Here's a truth that challenges conventional wisdom: if you can't sell jobs at $6 per foot, you probably won't sell them at $8 per foot either. Conversely, if customers will pay $6 per foot, they'll often pay $8 per foot when value is properly presented.

The difference isn't price—it's confidence and presentation. When you speak hesitantly, use filler words ("um," "uh," "like"), and focus on bulbs rather than benefits, customers sense uncertainty. They question whether you're truly professional and capable.

One installer raised prices from $3.50 to $7.00 per foot, fearing massive customer loss. Instead, closing rates remained steady. Customers willing to pay $3.50 were equally willing to pay $7.00 when the service was positioned as professional, hassle-free, and creating magical family memories.

Breaking Through the $6 Per Foot Myth

When installers insist "nobody in my area will pay more than $6 per foot," they're revealing limiting beliefs rather than market realities. Consider these questions:

How many Starbucks are in your area? Count cars going through the drive-through daily. Multiply by $10 per person, then by 30 days. That's over a million dollars monthly flowing through one coffee shop in your "poor" area.

How many Mercedes, BMWs, or $50,000+ vehicles do you see daily? People making $800 monthly car payments exist in your market.

How many people carry $300, $3,000, or even $30,000 handbags versus $3 Walmart bags? They all serve the same function, yet some pay 10,000 times more for essentially the same product.

How much do Rolex watches, regular manicures, and designer clothes cost in your area? If people spend thousands on these discretionary items, they'll invest in creating magical holiday memories for their families.

The money exists in every market. The question is whether you believe your service is worth premium pricing.

The Real Cost of Underpricing

Charging $6 per foot when you should charge $10 per foot isn't just leaving money on the table—it's making the business unsustainable. Consider the math:

  • To generate $100,000 revenue at $6/foot requires 16,667 feet of installation

  • The same $100,000 at $10/foot requires only 10,000 feet of installation

That 6,667-foot difference represents weeks of labor, substantial material costs, and significant safety risk exposure. Underpricing doesn't make you competitive—it makes you exhausted and unprofitable.

Furthermore, low-price customers tend to be more demanding, less loyal, and more likely to complain. Premium-priced customers value quality, professionalism, and convenience, making them ideal long-term relationships.

Taking Messy Action: The Path to Success

The most successful installers share one trait: they take imperfect action rather than waiting for ideal conditions. This bias toward execution compounds over time, creating momentum that analysis paralysis never generates.

Starting Without Perfect Conditions

One installer came to training five years ago in a cramped, wet garage with minimal equipment. He left being told he could realistically make $30,000-$50,000 his first year. He thought that prediction was crazy. He made $32,000 that first partial season. Last year, he did $500,000. This year, he's already closed $300,000 by early October.

The vast majority of sites listed in our results are found and added automatically as we crawl the web. Similarly, most business success comes from consistent execution of fundamentals rather than sophisticated strategies. That installer didn't have perfect systems, premium equipment, or years of experience—he had commitment to taking action despite uncertainty.

What Messy Action Looks Like

Yard Signs That Aren't Perfect: One installer put out 750 yard signs with only his website—no phone number. He made just $35,000 from that massive effort. After learning the lesson, he redesigned signs with large phone numbers. Keep it simple: big text showing what you do, prominent phone number, nothing else.

Closing Jobs Before Installing Your First Light: Many successful installers closed $10,000-$20,000 in contracts before personally installing a single bulb. They learned techniques through training, sold confidently based on that knowledge, then executed installations or hired help.

Starting in Late October: It's absolutely not too late to start a Christmas lights business in late October. Installers who attend training the last weekend of October and execute recommended strategies can realistically generate $30,000-$100,000 in their first partial season.

Learning From Failure

Messy action produces failures, and failures generate learning. That's how growth happens. When you discover that yard signs with only websites don't work, you've learned a valuable lesson. When you realize that talking about LED specifications bores customers, you adjust to selling emotions and benefits.

Winners fail frequently but learn quickly. Waiters avoid failure by avoiding action, ensuring they never learn the lessons that drive success.

Christmas lights installatin business

Your Go Time Action Plan

If you're ready to be a winner rather than a waiter, here's your immediate action plan:

This Week's Marketing Priorities

  1. Order 500-1,000 yard signs from moneybushes.com. These are "money bushes"—plant them and revenue grows. Get them ordered immediately, as production and delivery take 1-2 weeks.

  2. Post in 5 local Facebook groups about your services. Include groups like community pages, HOA groups, and local business networks.

  3. Post on LinkedIn positioning yourself as the local holiday lighting expert. Share educational content about safety, convenience, and professional installation benefits.

  4. Join and post in local mom groups. Mothers are typically primary decision-makers for holiday decorating and actively seek recommendations in these communities.

  5. Update your Google Business Profile daily with photos, posts, and updates. Search engines analyze content to assess whether it contains information relevant to what you are looking for, and systems look for quantifiable signals to assess relevance. Consistent posting signals active business and improves local search visibility.

Making Every Hour Count

If you're not busy with installations yet, you should spend 4-8 hours daily on marketing activities:

  • Making outbound calls to potential commercial clients

  • Door knocking in target neighborhoods

  • Posting on social media platforms

  • Following up with leads who haven't yet converted

  • Networking at local business events

This relentless focus on lead generation continues until you're so busy with work that marketing time naturally decreases. But in these early weeks, generating leads is your full-time job.

Equipment and Materials: Start Simple

Don't overcomplicate initial equipment purchases. You need:

Quality bulbs with warranties: Elite-grade LED bulbs with 5-year warranties prevent callbacks and protect reputation. Cheap bulbs fail frequently, creating expensive service calls and damaged customer relationships.

Premium socket wire: Admiral brand or similar quality wire withstands weather and prevents socket disconnections. Cheap wire allows sockets to pull off, causing shorts and safety hazards.

Clips and connectors: Stock various clip types (tough clips, flex clips) and maintain a 3:1 ratio of female to male connectors. Each string needs one male plug but multiple female connectors for extensions.

28-foot extension ladder: Aluminum for light weight. A 28-foot ladder handles 95% of residential installations in most markets. While 32-foot provides extra reach, the additional weight makes daily use exhausting.

Ladder stabilizer: Prevents gutter crushing, improves safety, and protects paint from scratches as you move the ladder.

Focus initial spending on marketing (yard signs) rather than excessive equipment inventory. It's better to have jobs you need to buy equipment for than equipment sitting unused because you don't have customers.

The 50% Deposit Strategy

Many new installers wonder how to fund materials when starting with limited capital. The solution is simple: collect 50% deposits when booking jobs.

When customers commit to installation, request 50% down to secure their spot on the schedule. This isn't about explaining you need money for materials—it's positioning the deposit as what's required to be scheduled. That deposit funds material purchases for their job and subsequent installations.

This approach allows you to scale without significant upfront capital. Sell $20,000 in jobs, collect $10,000 in deposits, buy materials and equipment, complete installations, collect final payments, and repeat. Each cycle builds working capital for larger growth.

Christmas lights yard signs

Dealing With Yard Sign Removal

One common concern: what do you do when competitors or "sign Karens" remove your yard signs?

Put out more signs. Give them more work to do. The goal isn't preventing removal—it's maintaining high visibility despite removal. Deploy hundreds of signs, expect some percentage to disappear, and continuously replenish.

Strategic placement: Put signs out Friday evenings so they have maximum weekend visibility before potential Monday removal. Place some in difficult-to-access locations where removal requires effort most people won't invest.

Nighttime deployment: Placing signs late evening or early morning when fewer people are around reduces immediate removal. Don't get hit by cars—safety matters more than any marketing campaign.

The return on yard sign investment far exceeds the frustration of occasional removal. One installer put out signs, turned around, and saw someone collecting them into her Subaru to "clean up the streets." His response? Put out more signs.

Overcoming the "My Area Is Different" Excuse

Every market has installers insisting their area won't support premium pricing. Meanwhile, other installers in the same market charge $10-$14 per foot successfully. The difference isn't the market—it's the mindset.

One installer in a supposedly "cheap" market with major $6/foot competition now charges $10-$14 per foot successfully. Some of his jobs reach $20 per foot. He's not serving a different market—he's presenting value differently and attracting quality-focused customers rather than price shoppers.

Content should clearly demonstrate first-hand expertise and a depth of knowledge, and after reading your content, will someone leave feeling they've learned enough about a topic to help achieve their goal? Similarly, when you demonstrate expertise, professionalism, and the transformative experience you provide, customers focus on value rather than price.

If you genuinely live in a rural area where premium pricing is impossible, consider driving to wealthier nearby markets. One successful installer drove an hour each way to the northeast side of Cincinnati because that's where his target customers lived. The additional drive time was worth accessing customers who valued quality service.

The Weekend That Changes Everything

For those serious about building a thriving Christmas lights business, in-person training provides immersive learning impossible to replicate through videos or books. Upcoming weekend training sessions offer:

Friday: Technical Installation Training

  • Hands-on practice with professional equipment (Pitch Hopper, Goat Steep Assist)

  • Installation on actual roofs, poles, and trees

  • Troubleshooting common issues

  • Safety protocols and best practices

  • Systems for efficient installation

Saturday: Business Growth and Sales

  • Marketing strategies that generate consistent leads

  • Sales processes that close premium-priced contracts

  • Leadership development for managing crews

  • Hiring strategies from experts who've built multiple crews

  • Networking with successful installers doing six and seven figures

The Saturday business training often provides more value than Friday's technical instruction. Installation techniques can be learned through practice, but sales, marketing, and leadership skills require modeling from successful practitioners.

Classes typically run 10-15 attendees, providing intimate environments for questions, networking, and relationship building. Several current seven-figure installers attend these trainings repeatedly because the networking and idea exchange with other successful operators generates ideas worth tens of thousands in additional revenue.

Christmas lights installation business

What if I don't have money for equipment and materials?

Start by selling jobs and collecting 50% deposits. Use those deposits to purchase materials for each job. Begin with one or two installations to generate cash flow, then scale from there. Don't buy significant inventory before having confirmed customers. It's better to sell jobs you need to buy materials for than own materials you can't sell.

How many yard signs should I deploy?

Start with 500-1,000 signs minimum. Plan to deploy 100-200 per week throughout November. It takes 6-8 hours to place 100 signs, so budget time accordingly. Signs are "money bushes"—plant them and revenue grows. This remains one of the highest-ROI marketing investments available.

Is it really not too late to start in late October?

Absolutely not too late. Installers who attend training the last weekend of October and execute recommended strategies consistently generate $30,000-$100,000 in their first partial season. The key is immediate action on marketing and confident premium pricing. Most sales momentum comes in November anyway, so late October launches work well.

Should I practice on friends' houses before selling real jobs?

Only if you have excess cash for materials. Otherwise, invest that money in 500 additional yard signs instead. You'll learn more from live customer installations than practice houses, and you'll be paid to learn. If you want hands-on practice first, attend in-person training where you can practice on real roofs with professional equipment and immediate feedback.

What do I do when competitors charge much less than my premium pricing?

Recognize that you're serving different market segments. Low-price competitors attract price-sensitive customers who compare primarily on cost. Your premium pricing attracts quality-focused customers who value professionalism, convenience, and results. These are different buyer profiles. Marketing and sales process should filter for your ideal customers rather than competing for everyone.

Christmas lights installation business blue white lights

How do I handle people who say nobody in their area will pay premium prices?

Count Starbucks customers in your area for one day. Calculate daily revenue ($10 average × customer count × 30 days). Observe how many luxury cars, designer accessories, and discretionary purchases happen in your "cheap" market. The money exists—the question is whether you believe your service merits premium pricing. If you don't believe it, customers won't either.

What's the most important factor for first-year success?

Taking messy action despite imperfect conditions. Winners start before they're ready, learn from failures, and adjust quickly. Waiters seek perfect conditions that never arrive. Your first installation won't be perfect, your first sales call will be awkward, and your first marketing attempts will produce mixed results. That's exactly how growth happens—through doing, failing, learning, and improving.

How do I overcome self-doubt and pricing confidence issues?

Surround yourself with successful people who reinforce abundance thinking and premium pricing. Join communities, attend trainings, and build relationships with installers doing six and seven figures. Their confidence and success stories normalize what seems impossible from your current perspective. Additionally, focus on selling benefits (family memories, safety, convenience) rather than features (bulb specifications, wire gauge) to shift conversations from price to value.

What should I prioritize: technical installation skills or sales and marketing?

Sales and marketing generate revenue; installation skills fulfill contracts. Both matter, but sales and marketing determine whether you have a business. You can hire installers or learn installation through practice, but if phones don't ring, technical skills are worthless. Prioritize lead generation and sales initially, then develop installation capabilities to fulfill the work you've sold.

How much can I realistically make in my first year?

First-year installers executing recommended strategies typically generate $30,000-$100,000 in partial seasons starting late October. Those beginning earlier can reach $50,000-$150,000. Year two often sees 2-5x growth as reputation, reviews, and refined systems compound. By year three, $250,000-$500,000 becomes achievable for committed operators. These aren't guarantees—they're realistic outcomes for those who take consistent action, price confidently, and focus relentlessly on marketing and sales.

Custom HTML/CSS/JAVASCRIPT
Christmas lights installation trainingChristmas lights installation business
blog author image

Jason Geiman

Jason Geiman parlayed his early passion for festive lighting into a thriving Christmas décor installation company which he founded and grew for over 4 years before selling the business in 2018. Now, he draws from his experience scaling a holiday lighting venture to help other Christmas lighting companies maximize their success. Jason feels compelled to share shortcuts he learned running his decoration operation. Jason has made it his mission to enable both residential and commercial clients to execute jaw-dropping lighting displays more easily. He loves experimenting with the latest high-tech LED bulb innovations to incorporate into his instructional programs and resources for those running their own Christmas lighting businesses. After selling his original company, he reinvented himself - driven as ever to spread seasonal magic, but now by helping others grow their holiday lighting ventures successfully. Follow Jason for regular tips on taking your Christmas lights business to the next level!

Back to Blog

Copyright ©2025 All Right Reserved website designed by christmaslights.io

Terms of Service / Privacy Policy

Have questions or need assistance?

Contact us at (855)619-LITE