Invisilights
Permanent Holiday Lighting
Customizable Lights for Any Event
Permanent Christmas Lights 24V Kit
Permanent Christmas Lights 36V Kit
Permanent Christmas Lights
Demo Kit
WHAT YOU NEED TO KNOW BEFORE ORDERING
Total Linear footage of the installation.
This should include footage of lights and channel along with any Extensions or jumps you'll need to make
Where your controller box will be located
This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.
What Voltage system you want to use 24V or 36V
This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.
Draw a Map
By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.
take the measurements from your map and add up the total number of materials you'll need.
For the Map out example above the total material breakdown is:
System Voltage: 36V
Color of channel: Cameo
Channel Type: Hat
Total Lighted Footage: 160'
Power injection: NO
Controller: 1
Channel: 27- 6' sticks
Screws- 200
Lights: 175
1' extensions-7
6' Extensions-2
12' extensions-2
25- extensions- 1
Y Cables- 3
End caps- pack of 10
Absolute necessities
-Controller
-Lights
-Channel
-Screws
-Extension cables
Other Accessories
-Y Cable
-End Caps
- Signal boosters
-Power injection material
When would you need to power inject?
The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.
Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)
Materials needed for power injection 36V
Power injection pig female pig tale
Power injection Extension cables
Power injection T Cable.
Materials needed to Power inject 24V
16/2 - 12/2 Low voltage landscaping wire
Cut and Splice T cable
Water Proof Wire connectors
Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions
Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.
Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.
Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.
Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.
Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.
Frequently Asked Questions
What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?
The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:
27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.
150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.
2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.
A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.
1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.
1 Controller that allows you to manage and customize the lighting effects easily.
Will I need any additional components besides what's included in the Invisilights permanent lighting kit?
While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:
Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.
Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.
Can I choose the color of the aluminum channel for my InvisiLights kit?
Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.
How do the included components of the InvisiLights kit enhance the lighting system?
Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:
Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.
RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.
Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.
Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.
GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.
Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.
Can I use Invisilights year-round?
Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.
Can I set timers and events for Invisilights?
Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.
Is it possible to achieve warm or soft white with Invisilights?
Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.
How do you ship your product?
Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.
Where are the controller and power supplies installed?
The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.
How long do Invisilights last?
Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.
Are Invisilights dimmable?
Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.
What types of custom channels are available?
Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.
Can I control different zones independently?
Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.
What is outdoor permanent lighting?
Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.
How does permanent lighting differ from traditional holiday lighting?
Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions
Discover Expert Tips on Our Blog
Compensating Your Lighting Crew Before Client Pay
In the Christmas lighting installation business, timely compensation for your team is crucial to maintain morale, productivity, and loyalty. However, one of the most significant challenges faced by business owners in this industry is compensating team members before receiving full payment from clients. This issue can lead to cash flow problems and strain relationships with both employees and clients. In this blog post, we'll discuss a solution to this problem: requesting a 50% upfront payment from clients.
The Problem
Delayed payments from clients can have a severe impact on your team's morale. When your sales team works hard to secure a project and your installation crew dedicates their time and effort to complete the job, they expect to be compensated promptly. If you're unable to pay them on time due to delayed client payments, it can lead to frustration, demotivation, and even turnover.
Moreover, compensating your team before receiving full payment from clients can cause cash flow issues for your business. You may find yourself struggling to cover overhead expenses, purchase materials for upcoming projects, or even meet payroll obligations. This financial strain can hinder your ability to take on new projects and grow your business.
Solution: Request a 50% Upfront Payment
To mitigate these issues, consider implementing a policy that requires clients to pay 50% of the project's total cost upfront. This approach offers several benefits:
1. Ensures partial payment before work begins: By securing a 50% upfront payment, you guarantee that your business receives a significant portion of the project's total cost before your team starts working. This payment provides a financial buffer and reduces the risk of non-payment.
2. Provides funds to compensate your team: With the upfront payment in hand, you'll have the necessary funds to compensate your team and installation crew for their work. This timely compensation helps maintain team morale and loyalty.
To implement this policy, clearly communicate the payment terms to your clients from the outset. Explain that the upfront payment is standard practice in the industry and that it ensures your team can be compensated fairly for their work. Be transparent about how the funds will be used and when the remaining 50% payment will be due (e.g., upon project completion).
Compensating Your Team
Once you receive the upfront payment, allocate a portion of it to your team. Determine a fair compensation structure based on the project's scope and value. For example, you may choose to pay your team a percentage of the upfront payment as a commission or offer a flat fee for each project.
Communicate the compensation plan clearly to your team, so they understand when and how they'll be paid. This transparency helps build trust and motivation within your team, as they know they'll be rewarded for their efforts in securing projects.
For further reading on how to compensate your crew leaders vs regular workers, see our blog post: The Ultimate Guide to Fair Compensation for Your Christmas Light Installation Crew
Managing Cash Flow
After compensating your team, use the remaining upfront payment to cover project expenses, such as materials, equipment rentals, and labor costs. By carefully managing these funds, you can ensure that your business has the necessary resources to complete the project successfully.
It's essential to plan for the remaining 50% payment, which will typically be due upon project completion. Communicate with your clients throughout the project to ensure they're satisfied with the progress and to address any concerns promptly. By maintaining a positive relationship with your clients, you increase the likelihood of receiving the final payment on time.
To further safeguard your business's financial health, maintain a cash reserve to handle unexpected expenses or delayed payments. This reserve can be built up over time by setting aside a portion of your profits from each project. Having a financial cushion provides peace of mind and allows your business to weather any temporary cash flow challenges.
Requesting a 50% upfront payment from clients is a smart strategy for compensating your lighting installation team before receiving full payment. By securing partial payment before work begins, you can ensure that your team is compensated fairly and promptly, maintaining their morale and loyalty. Additionally, this approach helps manage cash flow and reduces the risk of non-payment.
Implementing this policy requires clear communication with both clients and team members. Be transparent about payment terms, how funds will be allocated, and when the remaining payment will be due. By fostering open communication and trust, you can build strong relationships with your clients and team, leading to a more successful and profitable business.
By taking proactive steps to ensure timely compensation for your team and maintain healthy cash flow, you can set your lighting installation business up for long-term success. Don't let delayed client payments hinder your growth – start implementing the 50% upfront payment policy today and take control of your business's financial future.
1. Q: Why is it important to compensate my lighting installation team before receiving full payment from clients?
A: Compensating your team before receiving full payment helps maintain their morale, productivity, and loyalty. It also ensures that your team is rewarded for their hard work in a timely manner.
2. Q: How does requesting a 50% upfront payment help with team compensation?
A: Requesting a 50% upfront payment provides the necessary funds to compensate your sales team and installation crew for their work before the project is completed and the final payment is received.
3. Q: What are the benefits of requesting an upfront payment from clients?
A: Requesting an upfront payment ensures partial payment before work begins, reduces the risk of non-payment, and provides funds to compensate your team and cover project expenses.
4. Q: How should I communicate the upfront payment policy to my clients?
A: Clearly explain that the upfront payment is standard practice in the industry and that it ensures your team can be compensated fairly for their work. Be transparent about how the funds will be used and when the remaining payment will be due.
5. Q: How should I determine the compensation structure for my sales team?
A: Determine a fair compensation structure based on the project's scope and value. This could be a percentage of the upfront payment as a commission or a flat fee for each project they secure.
6. Q: How should I manage the remaining upfront payment after compensating my sales team?
A: Use the remaining upfront payment to cover project expenses, such as materials, equipment rentals, and labor costs. Plan for the remaining 50% payment, which will typically be due upon project completion.
7. Q: How can I maintain a positive relationship with my clients throughout the project?
A: Communicate with your clients regularly to ensure they're satisfied with the progress and address any concerns promptly. Maintaining a positive relationship increases the likelihood of receiving the final payment on time.
8. Q: What can I do to safeguard my business's financial health?
A: Maintain a cash reserve to handle unexpected expenses or delayed payments. Set aside a portion of your profits from each project to build up this reserve over time.
9. Q: What should I do if a client refuses to pay the 50% upfront payment?
A: If a client refuses to pay the upfront payment, consider whether the project is worth the financial risk. You may choose to negotiate a different payment structure or decline the project altogether.
10. Q: How can I get help implementing the 50% upfront payment policy in my business?
A: Consider scheduling a free consultation with an experienced team who can provide guidance on communicating with clients, structuring payment terms, and managing cash flow. Look for resources and support to help you navigate the process.
Copyright ©2026 All Right Reserved website designed by christmaslights.io
Terms of Service / Privacy Policy
Have questions or need assistance?
Contact us at (855)619-LITE