Invisilights
Permanent Holiday Lighting
Customizable Lights for Any Event
This should include footage of lights and channel along with any Extensions or jumps you'll need to make
This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.
What Voltage system you want to use 24V or 36V
This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.
By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.
take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:
System Voltage: 36V
Color of channel: Cameo
Channel Type: Hat
Total Lighted Footage: 160'
Power injection: NO
Controller: 1
Channel: 27- 6' sticks
Screws- 200
Lights: 175
1' extensions-7
6' Extensions-2
12' extensions-2
25- extensions- 1
Y Cables- 3
End caps- pack of 10
-Controller
-Lights
-Channel
-Screws
-Extension cables
-Y Cable
-End Caps
- Signal boosters
-Power injection material
The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.
Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)
Materials needed for power injection 36V
Power injection pig female pig tale
Power injection Extension cables
Power injection T Cable.
Materials needed to Power inject 24V
16/2 - 12/2 Low voltage landscaping wire
Cut and Splice T cable
Water Proof Wire connectors
Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.
Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.
Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.
Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.
Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.
The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:
27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.
150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.
2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.
A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.
1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.
1 Controller that allows you to manage and customize the lighting effects easily.

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:
Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.
Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.
Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:
Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.
RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.
Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.
Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.
GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.
Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.
The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

How long do Invisilights last?
Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

What types of custom channels are available?
Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.
Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.
Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions


It's November, and in November the phone starts ringing. The question every Christmas light installer asks is how to get more leads, because leads are the life of this business. If you aren't getting leads, you'll go out of business.
This guide covers what's working right now, what isn't guaranteed, how to follow up when jobs don't close right away, and how to keep your pricing strong when the phone gets busy. If you want more strategies for growing a Christmas light installation business, start here.
Installers who get leads in October are usually the ones already established in business. November is when most new customers call and ask to get their lights done. Most new installs roll in during November, especially if this is your first year. If you're in your second through fifth year, you'll get plenty in October, but you're usually putting up your existing customers' lights then anyway.
That's why you want all of your jobs done in October. You'll hit November with a fully open schedule and room for the new leads.
Leads roll in from now until Thanksgiving, and the biggest week of all is the week of Thanksgiving. Everyone who waited wants it done before the holiday. Keep that week as open as you can, because it's prime real estate. Save it for the customers who want to pay the most.
If you're hoping a marketing company will deliver leads, understand that no one can guarantee results. Installers have told stories like these:
One spent a lot of money with a company for marketing and got very few leads.
Another paid $4,000 to $5,000 for a website when starting out and got nothing.
Three people spent $2,000, $3,000, and $4,000 on one recommended provider and got zero leads.
Two people with a well-known Facebook ads provider put in $5,000 and got one or two jobs.
There is no secret sauce for getting a website ranked or getting better Facebook ads. Choose carefully, and don't assume a payment buys leads. Expect to try several things, because what works varies by area and person.
One installer replaced a template website, one of ten sites that looked alike, with a custom build. Within days of the new site going live on Thursday or Friday, five leads came in over the weekend.
A big part of the change was Google EEAT: Experience, Expertise, Authoritativeness, and Trust. The last letter matters most, because when people know, like, and trust you, they buy from you. What helps:
Pictures of you and your crew doing the work
After pictures, plus pictures showing why you do what you do
Reviews that build up over time
You may not get a lot this year, but it compounds. AI is changing daily, so stay up on it. ChatGPT, Gemini, and the other AI tools call out businesses based on what they find, so you want to be easy to find and well-reviewed.
You may need to do things you don't like. One is Yelp. Another is the Better Business Bureau, which costs about $600 a year. That is a good investment because it builds know, like, and trust, which is what ChatGPT, Claude, Google, Gemini, and Grok pull from.
If you show up in Google Maps, you'll do much better. Nobody scrolls down more than one or two times, so organic rankings matter less. If your Google Business Profile has 20 or 30 reviews, you'll be at double the next highest in many areas, and that gets you calls.
You won't get reviews if you don't ask for them. Ask at every stage:
During the sales process. When you first show up, tell the customer your goal is to make them so happy that they want to give a five-star review and tell their friends.
At the end of the job. Ask, "Is there any reason why you wouldn't give me a five-star review?" Then hand over a tap card and tap it on their phone, or send a QR code or text link.
Don't feel bad about asking. They paid for a service and you did a great job.

Installers are getting leads from many places:
Facebook groups: Some installers do very well just posting in local groups.
Facebook ads and Google Ads: Facebook closing rates are picking up for some installers. Facebook leads are often swiping and thinking, "Ooh, that's pretty, I want that." Google Ads leads are typing "I want Christmas lights."
SEO and your website
Yard signs: Yard signs always do work.
Nextdoor: It works well in some areas and poorly in others. Some are just complaint posts.
Put them all together and get them all working, and your phone rings more and more. When it rings that much, you stop worrying about charging less.
These are three channels many installers don't talk about, and they work.
You can't throw a mailer together and send it once. Send it three times: one in October, one in the first week of November, and another later in November. A single mailing won't do well.
Don't hang them once. Hit the same door three times within three or four weeks. The consistency matters: they see the door hanger, then your truck, then your yard signs. You want touch, touch, touch.
Door knocking is cheap. It costs you time and getting out of your car. Knock every door, and get a yes or no from about 90% of the people before you leave the neighborhood. Most people don't answer, so go back. If you book one or two jobs, use them as references: "You know Ms. Jones up the street? We're doing her house."
Keep signs, mailers, and door hangers simple. A piece has to catch the eye between the doorknob and the garbage can. Give it one clear-cut goal, not ten pictures. Many signs have QR codes and logos, and you can't even read the number.
For yard signs, MoneyBushes.com has a Canva template where you just change the phone number. A sign with only "Christmas lights" and a big phone number beats one with a bunch of extras. If your phone isn't ringing, check what's on your sign.
If you're starting out and want leads, here is the plan: buy 1,000 yard signs for about $3,000 and put out 200 a week right now. If you go all year, put out 100 a week. At minimum, buy 500 and put out 100 every Friday night, no matter what. That will get your phone ringing.
Many people won't put out yard signs because they're scared someone will see them. Get that out of your head. You have to go after these jobs.
An installer with 40 signs out and four quotes sent, but no conversions yet, is normal. Expect one to two jobs out of every 10 quotes, which is 10% to 20%. So you may need 10 quotes to get one job, and sometimes 20 quotes to get a few more. Keep putting signs out.
Look at what you post. If you only show small ranches 80 feet long, you'll attract small houses. If you post big homes with columns, trees, rooflines, ridge lines, and the whole nine yards, and talk about how much the customers loved it, you'll attract bigger jobs.
Customers who pay the least are your biggest pain. They want you back for every little thing and are never grateful, because to them $500 is a lot of money. For a customer whose house payment is more than $5,000, $5,000 is nothing.
One installer who has been in business for 28 years raised his prices. He lost 20 to 25 customers, but he got better customers and ended up making the same amount while doing 25 fewer jobs. That is the goal: get your average ticket up and do less work.
A dream scenario: 100 jobs at $5,000 is half a million dollars from only 100 jobs.
Installers who run on word of mouth alone tend to charge cheap because they don't have many leads and have to close every one. With a full lead pipeline, you can't afford cheap customers.
If November is three-quarters booked or more, you have two choices. Hire another crew, or raise your prices a lot. You have only a few open slots, and you want those premium customers, not the cheap ones. If you also do gutter cleaning or other services and can't staff them, raise prices on both.
One installer who took this advice raised his prices and hit a $100,000 month in October. He didn't think he could do it before.

There is no way to put C9s on brick other than hot glue, and it isn't recommended. Two $4,000 installs can look the same on paper, but one takes four to six hours and the other takes 12 to 16 hours. The extra time often goes to fixing glue that fell off.
Skip the callbacks. People will pay for plenty of other work:
Ground stake lighting
Columns
Bushes
Trees
Wreaths, including wreaths on windows
Garland
Find wreaths, garland, and other supplies at Christmas Lights HQ.
For a three-story commercial building on brick, gluing is probably the best bet. You could also mount a strip of rubber or PVC pipe from top to bottom, fasten the lights to it with zip ties, and paint it the color of the brick. Don't glue to a painted surface like a dealership's, because you'll ruin the paint. Use something like a thick rubber instead. It's still hard, but it's an option.
It's all about reps. It won't happen overnight. You need to know how to sell the magic, and many people don't even know what the magic is. It isn't about the bulbs.
Go out and knock on doors and pick up the phone. Every no is closer to a yes, and it's a numbers game. Learn what to say and what not to say.
One installer's first year was 39 jobs for about $40,000. He used the same marketing company another installer paid $5,000 for, and that installer got only one lead. The company kept saying the leads were coming before Halloween, then before Thanksgiving. What worked was a model of getting leads any way possible: Google Ads, Facebook ads, Thumbtack, and yard signs. Yard signs brought in about 25 of the 39 jobs.
His biggest regret was not learning to sell faster. The best fix is being coached by someone with a proven record of helping others, because what works for one person's personality may not work for yours.
Get quotes out super fast. Don't take three, four, ten, or twenty hours. If you're going in person, sell it while you're there and don't come back empty-handed. Answer the phone, take action, and keep going.
When you need supplies, Christmas Lights HQ ships same day when orders come in before 2:00. Average delivery is two to three days, and about three or four days on the other side of the country. For more training, visit ChristmasLights.io.

Most new installs roll in during November. The biggest week is Thanksgiving week, so keep it open for premium customers.
One to two jobs out of every 10 quotes, or 10% to 20%. You may need 10 to 20 quotes to book a few jobs.
Buy 1,000 signs and put out 200 a week now, or at least buy 500 and put out 100 every Friday night. Learn more at ChristmasLights.io.
Keep it simple: "Christmas lights" and a big phone number. Skip QR codes and logos so the number is easy to read.
Send mailers three times: in October, the first week of November, and later in November. Hang door hangers at the same house three times in three or four weeks.
Yes. It's cheap. Aim to get a yes or no from about 90% of the doors before leaving a neighborhood, and use booked neighbors as references.
Hire another crew or raise your prices a lot so the remaining slots go to premium customers.

Only with hot glue, which isn't recommended because it causes callbacks. Offer ground stakes, columns, bushes, trees, wreaths, and garland instead. Find supplies at Christmas Lights HQ.
Ask during the sales process and at the end of the job. Ask whether there's any reason they wouldn't leave a five-star review, then tap a card on their phone or send a QR code or text link.
No. Installers have paid thousands for websites and ads and received little. Build your website with EEAT in mind, collect reviews, and use several lead sources at once.
Terms of Service / Privacy Policy
Have questions or need assistance?
Contact us at (855)619-LITE