Invisilights

Permanent Holiday Lighting

Customizable Lights for Any Event

invisilights 100 foot permanent light kit

Permanent Christmas Lights 24V Kit

invisilights 150' permanent light kit

Permanent Christmas Lights 36V Kit

Permanent light demo kit

Permanent Christmas Lights

Demo Kit

WHAT YOU NEED TO KNOW BEFORE ORDERING

Total Linear footage of the installation.

This should include footage of lights and channel along with any Extensions or jumps you'll need to make

Where your controller box will be located

This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.

What Voltage system you want to use 24V or 36V

This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.

Draw a Map

By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.

take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:

System Voltage: 36V

Color of channel: Cameo

Channel Type: Hat

Total Lighted Footage: 160'

Power injection: NO

Controller: 1

Channel: 27- 6' sticks

Screws- 200

Lights: 175

1' extensions-7

6' Extensions-2

12' extensions-2

25- extensions- 1

Y Cables- 3

End caps- pack of 10


Absolute necessities

-Controller

-Lights

-Channel

-Screws

-Extension cables


Other Accessories

-Y Cable

-End Caps

- Signal boosters

-Power injection material


When would you need to power inject?

The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.

Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)

Materials needed for power injection 36V

Power injection pig female pig tale

Power injection Extension cables

Power injection T Cable.


Materials needed to Power inject 24V

16/2 - 12/2 Low voltage landscaping wire

Cut and Splice T cable

Water Proof Wire connectors

Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions

Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.

Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.

Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.

Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.

Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.

Frequently Asked Questions

What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?

The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:

  • 27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.

  • 150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.

  • 2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.

  • A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.

  • 1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.

  • 1 Controller that allows you to manage and customize the lighting effects easily.

FAQ image

Will I need any additional components besides what's included in the Invisilights permanent lighting kit?

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:

Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.

Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.

Can I choose the color of the aluminum channel for my InvisiLights kit?

Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

FAQ image

How do the included components of the InvisiLights kit enhance the lighting system?

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:

Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.

RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.

Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.

Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.

GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.

Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

FAQ image

Can I use Invisilights year-round?

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

FAQ image

Can I set timers and events for Invisilights?

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

FAQ image

Is it possible to achieve warm or soft white with Invisilights?

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

FAQ image

How do you ship your product?

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.

Where are the controller and power supplies installed?

The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

FAQ image

How long do Invisilights last?

Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

FAQ image

Are Invisilights dimmable?

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

FAQ image

What types of custom channels are available?

Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.

FAQ image

Can I control different zones independently?

Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

FAQ image

What is outdoor permanent lighting?

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.

How does permanent lighting differ from traditional holiday lighting?

Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions

FAQ image

Discover Expert Tips on Our Blog

Start a Christmas Light Business in 2026: 8-Week Plan

Start a Christmas Light Business in 2026: Is It Too Late?

October 05, 2026•14 min read

You've watched other installers hanging lights and booking jobs, and you're wondering if you missed your window this year. You didn't.

Installers have started their businesses in the last week of October and finished their first season at $40,000. One started on November 10 and made $35,000. Others started as late as December 5 and still made $10,000 to $15,000. Starting late is not the problem. Not taking action is.

Quick Answer: No, it's not too late to start a Christmas light business in 2026. You have October and November—about eight weeks—to build your season. Installers who started in late October and November have made $35,000 to $40,000 their first year. What matters is having a written plan, learning to sell and taking action every single week.

This guide covers what new and growing installers need to do right now: the eight-week plan, the sales skills that come before the lights, the little things that let you charge $10 to $12 a foot, and the safety and insurance issues that can end a business overnight. For step-by-step training, start with ChristmasLights.io professional installer training.

Custom HTML/CSS/JavaScript

Is It Too Late to Start a Christmas Light Business in 2026?

No. It's better to start this year—even in November—than to wait until next year.

Why Starting Late Still Pays Off

The biggest reason to start now isn't just this season's revenue. It's what you learn. The moment you put out yard signs and the phone starts ringing, you start learning how to answer it. Many new installers don't know what to say on the phone or how to talk to a homeowner. You want to learn that this year, not next year.

First-Year Results From Late Starters

These are real results from installers who started late in the year:

  • An installer who started in the last week of October made $40,000 in his first year.

  • Another who started the week of November also made $40,000 his first year.

  • An installer who started on November 10 made $35,000.

  • Installers who started on December 5 still made $10,000 to $15,000.

Age isn't a barrier either. A 17-year-old high school senior playing football is starting his Christmas light business this year, and an 18-year-old installer is growing his. Meanwhile, one of the largest installers in the Indianapolis area—10 to 15 years in business—has already doubled where he was at this time last year.

This is not an easy business. It takes time and money. But people are building six- and seven-figure Christmas light businesses, and some are reaching $2 million to $3 million.

Do You Have a Plan for the Next Eight Weeks?

You have October and November. That's eight weeks to get to $100,000—or $1 million—this year, and the clock is ticking. Hoping and wishing will never get you there. A written plan will.

Write Down Your Vision

Where do you want to be this year? Where do you see yourself next year? Write it down. If you can't answer those questions, you don't have a target to aim at.

Build a Week-by-Week Marketing Plan

Your plan should say exactly what you'll do every week for the next eight weeks. For example:

  • I am going to put out this many yard signs this week.

  • I am going to call this many people every week.

  • I am going to email this many people every week.

  • I am going to knock on this many doors this week.

  • I am going to put out 1,000 door hangers this week.

Numbers on paper turn "I'd like to grow" into actions you can check off.

Do Three Things Before Bed Tonight

One established installer shared a simple nightly routine that's worth copying word for word:

  1. Load 50 yard signs in your truck for tomorrow.

  2. Make a list of five businesses you'll cold call tomorrow.

  3. Write thank-you cards to everyone you gave an estimate to this week.

It's the little things that grow a business, and these are three of them.

Why Should You Learn to Sell Before You Hang a Single Light?

Because if you don't know how to sell, it doesn't matter how well you hang the lights. Most new installers worry about the installation. The ones who grow worry about the sale first.

Master the Phone Call

The phone is where most jobs are won or lost. If you don't know what to say when a homeowner calls, you'll lose jobs you never even got to quote. Start with this breakdown of the eight steps of a Christmas light phone script, and practice it until it sounds natural.

Your Body Language Sells (or Doesn't)

Selling isn't only about your words. People decide whether to buy from you based on your body language, the way you speak and the way you interact with them. Pay as much attention to how you show up and carry yourself as you do to what you say.

Don't Be the $6-a-Foot Installer

Listen to how the $6-a-foot installer sells: "We're the cheapest people out there. We'll put the lights up, we'll risk our lives for $6 a foot, and it's all about the bulb and the clip." Price, bulbs and clips are all they talk about—so price is all the customer thinks about.

Meanwhile, installers who sell differently are getting $9, $10, $11 and $12 a foot. You don't get high average tickets by charging cheap.

Christmas lights installation business

What Little Things Let You Charge $10–$12 a Foot?

Customer service is what sets the expectation, and the expectation is what lets you charge $10 to $12 a foot instead of $8. None of this is about putting up the lights. It all happens before you ever get to the lights.

Send Thank-You Cards After Every Estimate

Probably only about 1% of installers send thank-you cards, and these are just for getting an estimate. That alone sets you apart from almost everyone you're competing against.

Communicate Before They Have to Ask

Are you emailing customers to tell them about your company? Are you texting them to let them know you're on the way and will be there in 22 minutes? Small updates like these make the whole experience feel professional.

Look Professional—Even on a Budget

Wear a uniform and a badge with your picture on it. If you're just starting and can't afford a truck wrap, you can still clean-shave, get a haircut and wear a polo. A polo alone goes a long way.

Upgrade Your Quotes, CRM and Website

Ask yourself:

  • Are you doing in-person quotes or online quotes?

  • Do your quotes look professional?

  • Are you using a CRM, or just texting things back and forth?

  • Does your website have a video that explains what happens next—what you'll do once a customer fills out the form?

These little things go so far. They separate you from everyone else.

How Do You Get a Higher Average Ticket?

You get high average tickets by selling more than the front of the house:

Add-ons are also how returning clients grow. One installer who didn't have many returning clients in the past now has all of them booked but two—by picking up the phone and adding add-ons.

What This Looks Like at Scale

One established installer recently shared these numbers:

  • 16 jobs sold in a single day, totaling $25,000

  • An average ticket of $1,610

  • $381,000 sold season to date

  • 110 calls in September

  • An 84% renewal rate from last year, with more than 100 still to go

That didn't happen overnight. He's been in business for a couple of years, has been to classes, understands sales, has salespeople and keeps marketing. Another installer in a town of only 80,000 people has washed 1,600 houses and will do $750,000 in lights—without personally installing a single bulb.

What Marketing Actually Grows a Christmas Light Business?

Be a hunter, not a farmer. Farmers want warm leads and the easy button. Hunters go looking for new business, work the long hours and do what's necessary. Yes, you can pay for Facebook ads or Google ads so you don't have to do anything, and sometimes that grows a business some. But the installers growing fastest are out doing the work.

Put Out Yard Signs—Lots of Them

The installer with $381,000 sold put out more than 700 to 800 yard signs in a month. That doesn't happen by wishing. Two practical tips:

  • Hard ground: When the ground is hard as a rock, take a drill and drill two holes to get the sign in.

  • Rain: It's easy to put out signs in the rain. There's less traffic, and the stakes go right into the ground. Just be careful—some people don't know how to drive in the rain.

Answer Questions in Text and Video

Marcus Sheridan's They Ask, You Answer—and Endless Customers, which carries the same message—teaches a simple idea: answer your customers' questions and build pages around those answers. One installer's website has tons of pages answering customer questions, in both written and video form, because some people like to read and some like to watch. If you only do one and not the other, that's a problem.

It works outside Christmas lights, too. A roofer went from $0 to $2 million in one year by following Endless Customers, picking up the phone and posting two, three and four videos a day from his job sites.

Post Consistently—Don't Wait for Perfect

Perfection is the number one dream killer. What you think is perfect today, you'll think is terrible six months from now. Your first video won't have the best picture or the best audio. Post it anyway, on Facebook, YouTube and TikTok. Consistently taking action—putting one foot in front of the other—is what makes you better.

Which Christmas Light Timers Cause the Fewest Callbacks?

There's no perfect timer. Some installers spend top dollar on high-end timers, others buy cheap ones, and some have more issues than others. Either way, timers are typically your number one callback—other than a dog, squirrel or other animal chewing through something.

Photocell vs. Pre-Programmed Timers

  • Photocell timers are simple and easy. If one acts up, you can often flip it or put it in the dark.

  • Pre-programmed timers work well when they work. But when they have issues, you're guaranteed a trip back out.

If a timer is giving you problems, cut it off. One installer in Minneapolis with 4,000 installs uses the more expensive timer on the site because it's given him the fewest callbacks. Both options are in the Christmas light timers collection.

Other installers report that timers aren't their biggest issue at all. For them, callbacks come from cut wires, minis falling or bulbs.

Christmas lights installers talking with a couple

How Do You Protect Your Crew and Your Business?

All it takes is one fall. A safety mindset will protect your business more than anything else, because a lack of one will take you down faster than anything else.

Falls Are Real—Even for Veterans

At least one installer has already fallen off a roof this year, landing on a railing and injuring his lung. Last year, there were probably six to 10 falls among installers we know of. One had been hanging lights for 20 years and walked backward off a roof. The only thing that saved his life was his Apple Watch.

If you have a crew, get them into a safety mindset—not a "go do the sketchy stuff" mindset. And it's okay to tell people no. You don't have to sell sketchy jobs. There are plenty of easier jobs out there.

Workers' Comp: What to Know Before You Hire

If you 1099 your workers and they don't have workers' comp, they can sue you, and they can sue the homeowner. A hospital stay of more than two or three days can run a $300,000 to $400,000 bill. Here's what installers have learned:

  • It depends on your state. In Kentucky, coverage had to be paid largely up front and was very expensive. In Ohio, it runs through the state.

  • Expect roughly 5% to 10% of payroll—sometimes more. If you're classified as roofing, one installer pays $28 per $100 of payroll. Others report paying $3,700 and $5,000.

  • Estimate payroll honestly. You will get audited. If you estimate $50,000 in payroll and actually pay $100,000, you'll owe the difference.

  • It typically doesn't cover you as the owner. Some jobs require you to carry a policy anyway, even though it won't pay you if you're hurt.

  • Don't post photos of your crew on roofs without harnesses and ropes. Carriers can see those photos and drop you.

Talk to your insurance agent about how your work is classified. Costs like these are exactly why you have to charge $8 to $12 a foot.

Your Plan to Start and Grow in 2026

Most businesses fail within three to five years—not because the owners can't hang lights, but because they're great installers who don't know how to run a business or what to charge. Avoid that trap with these steps:

  1. Decide you're starting now. Don't wait for next year. The lessons you learn this season are worth as much as the revenue.

  2. Write your vision and an eight-week plan. Signs, calls, emails, door knocks and door hangers—with numbers for every week.

  3. Learn the phone script. Selling comes before installing.

  4. Do the little things. Thank-you cards, on-the-way texts, a polo, professional quotes and a CRM.

  5. Sell the whole property. Entire roof, ground stakes, trees, bushes and wreaths.

  6. Hunt for business. Put out yard signs, cold call five businesses a day and post videos consistently.

  7. Protect your people. Build a safety mindset and get the right workers' comp before you hire.

There's nothing special about the installers hitting six and seven figures. Two installers in one mentorship program are on track to reach $1 million this year—one in his second full-time year, the other in his third. One former garbage man built a Christmas lights and pressure washing business to more than $1.4 million last year, and he's still taking action after a fire damaged his building. They believed they could, and they took action.

Ready to start or grow your Christmas light business? Learn the full system—installation, sales and marketing—through ChristmasLights.io professional installer training, and connect with other installers in the ChristmasLights.io installer community. When you're ready to stock up, shop professional-grade lights and supplies at Christmas Lights HQ.

FAQ about Christmas Lights Business

Is it too late to start a Christmas light business in 2026?

No. You still have October and November—about eight weeks—to build your season. Installers who started in the last week of October and in November have made $35,000 to $40,000 their first year, and some who started on December 5 still made $10,000 to $15,000.

How much can you make in your first year installing Christmas lights?

It depends on how fast you take action. Late starters have made $35,000 to $40,000 in their first season, and installers trained through ChristmasLights.io have made $30,000, $50,000 and $100,000 in their very first year.

What should I do first when starting a Christmas light business?

Write down your vision and a week-by-week marketing plan, then learn how to sell—starting with the phone. If you don't know how to sell, it doesn't matter how well you hang the lights.

What should I say when a customer calls about Christmas lights?

Follow a proven phone script so you know exactly what to say. This guide to the eight steps of a Christmas light phone script walks through each part of the call.

How do Christmas light installers charge $10 to $12 a foot?

By doing the little things that set expectations: thank-you cards after estimates, on-the-way texts, a professional appearance, professional quotes, a CRM and a website video that explains the next steps. Installers who sell this way are getting $9 to $12 a foot.

How do I increase my average Christmas light ticket?

Sell the entire roof instead of just the front, and add ground-stake lighting, trees, bushes and wreaths.

What's the best timer for Christmas lights?

There's no perfect timer, and timers are typically the number one callback. Photocell timers are simple and easy. Pre-programmed timers work well, but when they fail, you're guaranteed a return trip. An installer with 4,000 installs uses the more expensive option in the Christmas light timers collection because it's given him the fewest callbacks.

How do I put out yard signs when the ground is hard?

Use a drill to drill two holes, then set the sign. Rainy days are also a good time to put out yard signs, because the stakes go right into the ground and there's less traffic.

How much does workers' comp cost for a Christmas light business?

It depends on your state. It's typically around 5% to 10% of payroll and can be more. If your work is classified as roofing, one installer pays $28 per $100 of payroll. Estimate payroll honestly, because you will get audited, and talk to your insurance agent.

Does workers' comp cover me as the business owner?

Typically, no. Workers' comp usually doesn't pay you as the owner if you get hurt, though some jobs still require you to carry a policy. That's one more reason a safety mindset matters for everyone on the roof—including you.

Custom HTML/CSS/JavaScript
Christmas Lights trainingchristmas light businessChristmas lights business success
blog author image

Jason Geiman

Jason Geiman parlayed his early passion for festive lighting into a thriving Christmas décor installation company which he founded and grew for over 4 years before selling the business in 2018. Now, he draws from his experience scaling a holiday lighting venture to help other Christmas lighting companies maximize their success. Jason feels compelled to share shortcuts he learned running his decoration operation. Jason has made it his mission to enable both residential and commercial clients to execute jaw-dropping lighting displays more easily. He loves experimenting with the latest high-tech LED bulb innovations to incorporate into his instructional programs and resources for those running their own Christmas lighting businesses. After selling his original company, he reinvented himself - driven as ever to spread seasonal magic, but now by helping others grow their holiday lighting ventures successfully. Follow Jason for regular tips on taking your Christmas lights business to the next level!

Back to Blog

Copyright ©2026 All Right Reserved website designed by christmaslights.io

Terms of Service / Privacy Policy

Have questions or need assistance?

Contact us at (855)619-LITE