Invisilights

Permanent Holiday Lighting

Customizable Lights for Any Event

invisilights 100 foot permanent light kit

Permanent Christmas Lights 24V Kit

invisilights 150' permanent light kit

Permanent Christmas Lights 36V Kit

Permanent light demo kit

Permanent Christmas Lights

Demo Kit

WHAT YOU NEED TO KNOW BEFORE ORDERING

Total Linear footage of the installation.

This should include footage of lights and channel along with any Extensions or jumps you'll need to make

Where your controller box will be located

This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.

What Voltage system you want to use 24V or 36V

This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.

Draw a Map

By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.

take the measurements from your map and add up the total number of materials you'll need.

For the Map out example above the total material breakdown is:

System Voltage: 36V

Color of channel: Cameo

Channel Type: Hat

Total Lighted Footage: 160'

Power injection: NO

Controller: 1

Channel: 27- 6' sticks

Screws- 200

Lights: 175

1' extensions-7

6' Extensions-2

12' extensions-2

25- extensions- 1

Y Cables- 3

End caps- pack of 10


Absolute necessities

-Controller

-Lights

-Channel

-Screws

-Extension cables


Other Accessories

-Y Cable

-End Caps

- Signal boosters

-Power injection material


When would you need to power inject?

The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.

Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)

Materials needed for power injection 36V

Power injection pig female pig tale

Power injection Extension cables

Power injection T Cable.


Materials needed to Power inject 24V

16/2 - 12/2 Low voltage landscaping wire

Cut and Splice T cable

Water Proof Wire connectors

Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions

Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.

Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.

Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.

Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.

Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.

Frequently Asked Questions

What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?

The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:

  • 27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.

  • 150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.

  • 2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.

  • A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.

  • 1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.

  • 1 Controller that allows you to manage and customize the lighting effects easily.

FAQ image

Will I need any additional components besides what's included in the Invisilights permanent lighting kit?

While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:

Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.

Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.

Can I choose the color of the aluminum channel for my InvisiLights kit?

Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.

FAQ image

How do the included components of the InvisiLights kit enhance the lighting system?

Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:

Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.

RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.

Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.

Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.

GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.

Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.

FAQ image

Can I use Invisilights year-round?

Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.

FAQ image

Can I set timers and events for Invisilights?

Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.

FAQ image

Is it possible to achieve warm or soft white with Invisilights?

Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.

FAQ image

How do you ship your product?

Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.

Where are the controller and power supplies installed?

The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.

FAQ image

How long do Invisilights last?

Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.

FAQ image

Are Invisilights dimmable?

Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.

FAQ image

What types of custom channels are available?

Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.

FAQ image

Can I control different zones independently?

Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.

FAQ image

What is outdoor permanent lighting?

Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.

How does permanent lighting differ from traditional holiday lighting?

Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions

FAQ image

Discover Expert Tips on Our Blog

This week is the week to start closing out jobs

Go Time for Christmas Light Installers: Yard Signs, Phone Calls, and Follow-Up That Close Jobs

October 29, 2026•13 min read

Halloween is wrapping up, and for Christmas light installers that means the phones are about to start ringing. This is the stretch when customers stop kicking tires and start asking, "Can you get our Christmas lights up?" Installers who are ready close jobs. Installers who miss calls, skip follow-up, or underprice their work watch those jobs go to someone else.

This guide covers what to do right now: how many yard signs to put out, how to answer the phone, how to raise your average ticket, how to follow up, and how to price the work. If you want more strategies for growing a Christmas light installation business, start here.

Custom HTML/CSS/JavaScript

It's Go Time

Typically, the week Halloween winds down is when people really start calling and asking. That is why installers get last year's customers up starting October 1: it frees the calendar and the crew for the rush of new clients. It's also the time to push hard on marketing.

Why Other Installers Seem to Be Closing So Much

If you're in your first year, you may see installers posting, "I closed another $10,000," or "Here's $30,000." What they don't mention is that many have been in business since 2015, 2018, or 2019. They have hundreds of five-star reviews, they've spent heavily on SEO, and they have a client base that refers friends. Some have been installing lights since September. Their results come from years of building, not luck, and you can build the same foundation.

That doesn't mean you can't close jobs this year. Some people can. One installer attended a class and then closed two dealerships. Nothing was special about him. He took action, and now those dealerships are in his portfolio for pictures and videos. But if you've never sold before, learning to sell and close is part of the job.

October Is Full of Tire Kickers

A lot of October leads aren't ready. Many people don't want lights up before Halloween because their Halloween decorations are up. That's why you keep pushing marketing now. From here on out, more of the people who call actually want to close.

Yard Signs: Put Out More Than You Think

Yard signs work in every part of the country, and no other marketing source is as good. One installer spent over $5,000 on Facebook ads, run by one of the best ad managers around, and closed one job. A thousand yard signs would still cost less than that $5,000, and he'd likely make more. Another installer using the same ad manager is getting ready to turn his Facebook ads off. Both also run signs, and the signs do better by a lot, even with Google Ads doing well.

How Many Signs to Put Out

Here is the plan:

  • October: 100 yard signs

  • November: 100 yard signs

  • The week before Thanksgiving: an extra 100

  • If you're just starting with signs: 200 per week in November, which could get you close to $100,000 even if you're starting from scratch

If you're putting out 100 a week, put them everywhere. One installer who ordered a thousand signs found it wasn't enough and had to order more.

If someone pulls your signs down, be consistent, prolific, and relentless. Put out more than they can take down.

What Your Sign Should Say

Keep the sign simple: a red background, white lettering, the words "Christmas lights" or "Pro Christmas light installer," and a big phone number. That is it. No logo, no QR code, nothing extra. If you've put out a lot of signs and gotten few calls, look at what's on the sign. Test it yourself: put the logo and QR code on one and only "Christmas lights" and a big phone number on the other, and see which wins. Need signs? Try MoneyBushes.com. After the season, you can pick signs up in mid-January to reuse, but they usually don't last that long.

Yard signs in a yard for Christmas Lights

Where to Put Signs

  • Place yours next to another company's sign. Don't put it in front of theirs or touch it. Data shows a Coke machine alone makes about $200, but a Coke machine and a Pepsi machine each make about $300, because the customer goes from "I want that" to choosing between option A and option B. The exception: if 50 signs are already there, skip it.

  • Spread them out. If you put four signs at every stop sign and light, you may get a call from code enforcement.

  • Cover subdivisions, areas outside subdivisions, and main streets. Focus on one area, then push out farther.

Answer the Phone

The number one problem is missed calls. It doesn't matter how much you spend on marketing if nobody picks up. If two yard signs sit next to each other and you don't answer, they call the other company, and by the time you call back, that company has booked the job.

Everyone misses calls. If you're on another call, or you're in a home doing a quote, you can't answer. That's why you need to know how many you miss. Set up a phone tracking number so you can see how many calls come in. If you don't track, you can't know what you missed.

Many installers don't want to hire a receptionist because of the cost. Ask how much each missed call is costing you. One installer who handles marketing for a client saw how many calls just one line missed and was shocked.

Raise Your Average Ticket Before You Lower Your Price

Lowering your price to get leads is a trap. It's a race to the bottom, and someone will always do it cheaper. Some people will do the same job for $200 or $300. That's okay, because there are customers for that. You want the customer willing to pay $2,000.

What One First-Year Result Tells You

A first-year installer in middle Tennessee put out 250 signs, got 20 calls, and sold two jobs at $900 and $1,100. Should the price drop? No. Look at the numbers:

  • Twenty calls and two sales is a 10% close rate, and early calls are rarely good. The only direction is up.

  • Many of those 20 calls weren't good leads. Did you give bids on all 20? How many times did you follow up?

  • Two jobs from 250 signs in the month of October means more signs, not lower prices.

  • Those $900 and $1,100 jobs are small. Get the average ticket up. In Nashville and Knoxville, you can get $9 to $12 a foot.

In the beginning, don't worry about pre-qualifying. Learn to talk on the phone. It's all reps. Do the mock-ups so you get quicker.

Send a Real Quote

If your quote says "133 feet times $8 equals this," you haven't learned to send the right quote. Put the work into a proper quote that shows the full job.

Know Your Price Floor

If you're under $8 a foot, you're too low. Some installers have sold at $20 a foot, and when they sold the value and made the customer feel amazing, that wasn't too high. Small houses also push per-foot pricing up. If you have a $1,000 or $1,500 minimum and the house has 50 feet, the per-foot price rises, and that's fine.

Aim for an average ticket of $1,500 to $2,000. At an average of 150 feet, a crew can put up about five jobs a day. At a $2,000 ticket, that is $10,000 a day. Paying two helpers about $1 a foot, split between a roof person and a ground person, leaves you plenty.

Follow Up Like It's Your Job

Follow-up closes big jobs. One installer sold $50,000 in a few days, including a $20,000 retirement community he worked for two months with calls, texts, emails, handwritten notes, an in-person visit, and donuts. That job is for three years, so it's actually a $60,000 sale, and it could be worth more if the customer adds on or renews for another three years.

Most installers give up after one or two follow-ups. They send a quote, ghost the customer, and wonder why they never get big jobs. It typically takes eight to 11 touches to close a job. Follow up every day for at least 14 days. If you're not following up, you're going to fold up.

Christmas Lights installers business

Handling "Let Me Talk to My Spouse"

That sentence can be a sales death sentence. If you're going in person, don't go unless both decision-makers will be there. Ask politely: "Is the decision-maker going to be there? I don't want to waste your time or mine." You can also ask, "Can you make a decision without your spouse?" On the phone, keep following up.

When a Prospect Says Someone Else Charges Half

Don't argue price. Ask yourself whether you're insured, whether you come back and fix problems, whether you leave one bulb out all season, and whether your five-star reviews are in front of the customer. Then ask why they're calling you at all.

Pricing Trees, Bushes, and Materials

Canopy-Wrapped Trees

Price canopy wrap by the foot of the tree's height, not by the strand. Branch wrapping is different. For an evergreen with minis placed six inches apart, expect $40 to $60 a foot. A 10-foot tree at $60 a foot is $600. For a 15-foot tree with C7s, you can keep charging by the foot of height, or you can figure out how many lights you need at 12- or 15-inch spacing, see what that costs, and double it.

Trees that lose their leaves are different. In the North, where leaves drop soon, space the lights about 18 inches apart, roughly fingertips to elbow, so you can see through the tree. A tree that keeps its leaves past Christmas won't look good that way, so keep that in mind in the South.

Bushes and Columns

For minis on bushes, six-inch spacing is most common, though four inches can look better on small bushes. On columns, some installers use four inches and others use six.

Materials and Labor

Materials run about $1.19 for the socket, clip, and bulb. Buy lights and supplies at Christmas Lights HQ, where orders ship out the same day.

Know the third, third, third rule: about a third of your revenue goes to materials, marketing, and similar costs, a third goes to labor, and a third is profit. In year two, you don't buy all the lights and tools again, because lights last five to seven years. So year two keeps labor at a third and profit becomes about two-thirds. If you did $23,000 in a week but only made $4,000 on five jobs, ask whether you charged enough, and remember the lifetime value of the customer.

Work Smarter on the Job

  • Use a garbage can for spools. A 1,000-foot spool tangles. Bulb and clip the lights (find sockets, clips, and bulbs at Christmas Lights HQ), then place them straight into a 55-gallon garbage can and take the can with you. Don't reel them back onto the spool. That's a disaster.

  • Skip windows. The lights fall off and you have to go back. If your employees clip them onto painted surfaces or stucco, you may end up repainting or repairing what they damaged.

  • Install the whole house. Do the roof, trees, bushes, and ground stakes. A single set of lights across the front is what everyone else does.

  • Wear a harness. Videos without harnesses can get your insurance canceled. If a worker falls, workers' comp or OSHA can come after you with liability and fines. Don't do anything you're not comfortable with. One roof anchor system worth looking at costs about $800 for the kit.

Know Your Numbers

Say your Meta ads cost $30 a lead and you close 10%. That is about $300 per customer. That's where you raise prices: you should be at $8 to $10 a foot and work your close rate up to 15 to 20%, which brings your cost per customer down. Reported Meta costs range from $12 to $18 a lead, or $8 to $10 a click. Meta brings more tire kickers than Google Ads.

If you've already closed a lot, check how much of your work falls in November. If you're booked into the end of November, add crews and raise prices. If you aren't booked for much of November, put everything into Google Ads and Facebook ads.

Believe You Can Get Paid

If you don't believe you're worth $8 to $12 a foot, you will never get it. If you don't see it, you won't achieve it. Installers in the greater Cincinnati area get $9 to $10 a foot. One installer in a city of eight million people said, "There are only cheap people here," while driving past Lamborghinis. Another installer, who is not in a major city, is on track for $750,000 this year with thousands of yard signs, Facebook ads, and Google ads.

It won't be perfect. Orders get missed, wrong colors go up, and bushes get skipped. Put systems in place so it happens less. And don't sell peak bulbs and LEDs. Sell the magic: the kids' faces and the feeling when the family comes outside.

It's a numbers game. You won't close them all, and you don't want to, because that means you're too cheap. Consistency is key. For more training, visit ChristmasLights.io.

Christmas Lights Installation FAQ

How many yard signs should I put out?

Put out 100 in October and 100 in November, plus an extra 100 the week before Thanksgiving. If you're just starting, 200 per week in November can get you close to $100,000.

What should a yard sign say?

Keep it simple: red background, white lettering, "Christmas lights" or "Pro Christmas light installer," and a big phone number. No logo or QR code.

Christmas lights trees and bushes

Is it okay to put my sign next to a competitor's?

Yes, put it next to theirs, not in front of or touching it. Two options draw more customers than one. Skip spots that already have 50 signs.

What's the biggest mistake that costs installers jobs?

Missed phone calls. Track your calls with a tracking number, and if two signs sit side by side, the company that answers wins. Learn more at ChristmasLights.io.

Should I lower my price when I'm not getting enough calls?

No. Put out more signs, do more reps, and get your average ticket up. Lowering your price is a race to the bottom.

How many times should I follow up?

Follow up every day for at least 14 days. It typically takes eight to 11 touches to close. Find more sales training at ChristmasLights.io.

How should I price a tree?

For canopy wrap, price by the foot of the tree's height. An evergreen with minis six inches apart is about $40 to $60 a foot, so a 10-foot tree at $60 a foot is $600.

How do I keep a 1,000-foot spool from tangling?

Bulb and clip the lights, then place them in a 55-gallon garbage can instead of reeling them back on the spool.

What do I say when a customer wants to talk to a spouse first?

Make sure both decision-makers will be there before you visit. Ask politely if the decision-maker will be there so you don't waste either person's time.

What's a good average ticket to aim for?

Aim for $1,500 to $2,000. At that level, a crew averaging 150 feet can do about five jobs a day. Get supplies at Christmas Lights HQ.

Christmas lights business successChristmas lights marketing
blog author image

Jason Geiman

Jason Geiman parlayed his early passion for festive lighting into a thriving Christmas décor installation company which he founded and grew for over 4 years before selling the business in 2018. Now, he draws from his experience scaling a holiday lighting venture to help other Christmas lighting companies maximize their success. Jason feels compelled to share shortcuts he learned running his decoration operation. Jason has made it his mission to enable both residential and commercial clients to execute jaw-dropping lighting displays more easily. He loves experimenting with the latest high-tech LED bulb innovations to incorporate into his instructional programs and resources for those running their own Christmas lighting businesses. After selling his original company, he reinvented himself - driven as ever to spread seasonal magic, but now by helping others grow their holiday lighting ventures successfully. Follow Jason for regular tips on taking your Christmas lights business to the next level!

Back to Blog

Copyright ©2026 All Right Reserved website designed by christmaslights.io

Terms of Service / Privacy Policy

Have questions or need assistance?

Contact us at (855)619-LITE