Invisilights
Permanent Holiday Lighting
Customizable Lights for Any Event
Permanent Christmas Lights 24V Kit
Permanent Christmas Lights 36V Kit
Permanent Christmas Lights
Demo Kit
Permanent Christmas Lights
100' Kit
Permanent Christmas Lights
150' Kit
WHAT YOU NEED TO KNOW BEFORE ORDERING
Total Linear footage of the installation.
This should include footage of lights and channel along with any Extensions or jumps you'll need to make
Where your controller box will be located
This is the most important step to planning out an installation, Without knowing where the controller will be you'll have no way to know the right materials to buy when it comes to extensions and accessories.
What Voltage system you want to use 24V or 36V
This is a decision you will make based on convince and efficiency, the most important factor with this will be the footage of each lighting run. If the total footage of a run is over 100' you'll need to either power inject on that run or switch to the 36V system that can go up to 200' before needing power injection.
Draw a Map
By mapping out the installation you'll be able to better understand and plan out the install giving you a better idea of what all you'll need to purchase to complete the job.
take the measurements from your map and add up the total number of materials you'll need.
For the Map out example above the total material breakdown is:
System Voltage: 36V
Color of channel: Cameo
Channel Type: Hat
Total Lighted Footage: 160'
Power injection: NO
Controller: 1
Channel: 27- 6' sticks
Screws- 200
Lights: 175
1' extensions-7
6' Extensions-2
12' extensions-2
25- extensions- 1
Y Cables- 3
End caps- pack of 10
Absolute necessities
-Controller
-Lights
-Channel
-Screws
-Extension cables
Other Accessories
-Y Cable
-End Caps
- Signal boosters
-Power injection material
When would you need to power inject?
The controller will come with 3 outputs for your lighting runs, each 36V output can do a Max of 200', the 24V system can do a max of 100'. After that max you'll need to inject power. After you do so you can go an additional 100' with the 24V or 200' with the 36V system.
Power injection is needed due to voltage drop, voltage drop happens due to the length traveled away from the power source along with the gauge of the wire. due to the gauge of wire the lights and extensions run on it drops in voltage enough at 100' with the 24V system and 200' with the 36V system to effect the lights performance requiring a addition of power (Power Injection)
Materials needed for power injection 36V
Power injection pig female pig tale
Power injection Extension cables
Power injection T Cable.
Materials needed to Power inject 24V
16/2 - 12/2 Low voltage landscaping wire
Cut and Splice T cable
Water Proof Wire connectors
Discover the Transformative Power of Invisilights: Expertly Installed Permanent Lighting Solutions
Enhance your installation offerings with Invisilights, the premier permanent lighting solution designed for seamless integration into any property’s exterior architecture.
Crafted with high-quality aluminum channels and advanced LED technology, Invisilights delivers durability and superior energy efficiency—key selling points for your clients seeking long-lasting, cost-effective lighting solutions. Our system not only provides brilliant illumination but also boosts the aesthetic appeal and functionality of any home.
Offer your clients peace of mind with our robust 5-year warranty, ensuring reliable performance and minimal maintenance needs. This warranty supports your commitment to quality and customer satisfaction, making it easier for you to sell and install with confidence.
Our flexible, programmable system allows you to meet any client’s specific desires—from subtle accents to full-scale holiday displays—making it an adaptable choice for various applications. With Invisilights, you can cater to a wide range of preferences and needs, increasing your market reach and customer retention.
Choose Invisilights for your installations and add a transformative product to your portfolio that will impress clients and ensure your services remain in demand for years to come.
Frequently Asked Questions
What exactly comes in the 150' InvisiLights permanent outdoor lighting kit?
The InvisiLights kit is comprehensively equipped to ensure you have everything you need for installation. Each kit includes:
27 sticks of 6-foot Aluminum Channel to house and protect the lighting elements.
150 feet of dynamic RGBW LED Lights, which includes 23 sets of 6-count and 14 sets of 1-count lights, allowing for extensive coverage and diverse configuration options.
2 Data Boosters to enhance signal strength across the lighting installation, ensuring consistent control and color output.
A 320W Power Supply capable of supporting up to 190 puck lights, providing ample power for even the most extensive setups.
1 GFCI Outlet Adapter to ensure safe outdoor electrical connections.
1 Controller that allows you to manage and customize the lighting effects easily.
Will I need any additional components besides what's included in the Invisilights permanent lighting kit?
While the Invisilights kit comes with all the essential components for a standard installation, there are a couple of scenarios where you might need additional items:
Jumper Wires: Depending on the layout of your installation and the number of gaps or 'jumps' between the sections of lights, you may require jumper wires. These wires help bridge the gaps without losing the continuity of the light sequence, ensuring a smooth and uniform display across more complex architectures.
Data Boosters: If any section of your lighting setup is more than 15 feet away from the control box, additional data boosters will be necessary. Data boosters help maintain the integrity and brightness of the lights over longer distances, ensuring consistent performance throughout your installation.
Can I choose the color of the aluminum channel for my InvisiLights kit?
Yes, you can select your preferred color for the aluminum channel to match your home’s exterior or personal taste. Please make sure to specify your color choice in the notes at checkout when you place your order.
How do the included components of the InvisiLights kit enhance the lighting system?
Each component in the InvisiLights kit plays a crucial role in creating an effective and stunning lighting display:
Aluminum Channels: Provide a durable, weather-resistant housing for the LED lights, which helps in maintaining a clean and nearly invisible look during the day.
RGBW LED Lights: Offer vibrant, full-spectrum color and white light combinations, making it perfect for any occasion from festive holidays to elegant ambient lighting.
Data Boosters: Ensure that the signal remains strong across longer distances, which is crucial for larger installations.
Power Supply: Designed to efficiently handle the energy needs of the system without overload, ensuring safety and durability.
GFCI Outlet Adapter: Adds an extra layer of safety by protecting against electrical shorts and surges, particularly important in outdoor settings.
Controller: Provides the flexibility to customize and control the lighting sequences, colors, and patterns right from your smartphone or controller, adding convenience and advanced functionality to your lighting system.
Can I use Invisilights year-round?
Absolutely! Invisilights are designed for versatile use throughout all seasons. Whether you're celebrating a special occasion, setting a mood for a party, Love your favorite sports team, or simply enhancing your home's ambiance, our lighting systems provide the perfect solution for any event, big or small.
Can I set timers and events for Invisilights?
Yes, Invisilights feature advanced programmable settings that allow you to schedule lighting for specific events and automate timers. This functionality ensures that your lighting preferences are perfectly aligned with your lifestyle, turning on and off at predetermined times without any manual intervention.
Is it possible to achieve warm or soft white with Invisilights?
Absolutely, Invisilights are equipped with RGBW technology, which includes a dedicated white LED alongside the standard red, green, and blue LEDs. This addition allows the system to produce authentic warm white, soft white, and various other shades of white with greater accuracy and intensity compared to traditional RGB systems. This capability ensures that you can effortlessly tailor the lighting to fit the desired ambiance and aesthetic of any environment, providing precise control over both vibrant colors and the subtlety of different white tones.
How do you ship your product?
Our products are shipped directly from our warehouse using reliable shipping carriers to ensure timely and safe delivery. Each product is securely packaged to prevent damage during transit, and we provide tracking information so you can follow your order’s journey to your doorstep.
Where are the controller and power supplies installed?
The controller and power supplies for Invisilights are typically installed in an accessible location such as a garage or utility room. These components connect to your home’s WiFi network, allowing seamless control over the lighting system via our user-friendly mobile app.
How long do Invisilights last?
Invisilights are engineered to last, with each LED bulb boasting a lifespan of over 50,000 hours. Given a typical usage of 10 hours per night, this translates to approximately 5,000 nights. This means your Invisilights could illuminate your home's exterior for nearly 14 years under these conditions, ensuring that your investment not only adds beauty but also long-term value to your property.
Are Invisilights dimmable?
Yes, all Invisilights are fully dimmable. This feature allows you to adjust the intensity of the light to suit various occasions, from a soft glow for a romantic evening to bright, vibrant colors for a festive celebration.
What types of custom channels are available?
Invisilights offers two types of custom channels, available in 40 different colors, ensuring a nearly invisible installation. These channels are designed to blend seamlessly with your home’s architecture, providing discreet yet effective lighting.
Can I control different zones independently?
Yes, the Invisilights system supports multiple zones which can be controlled independently or synchronized. This functionality allows for intricate lighting designs that can vary across different areas of your home, enhancing the overall impact and utility of your installation.
What is outdoor permanent lighting?
Permanent lighting refers to architectural-grade lighting systems that are installed permanently on your property to provide year-round illumination.
How does permanent lighting differ from traditional holiday lighting?
Unlike traditional holiday lighting, which is typically temporary and used only during specific seasons, permanent lighting is installed once and can be used throughout the year for various occasions
Discover Expert Tips on Our Blog
Christmas Lights 101: A Comprehensive Guide to Perfect Hanging
The holiday season is a magical time filled with joy and festivity, and one of the most iconic symbols of this season is the beautiful glow of Christmas lights. Many homeowners and businesses seek professional help to turn their properties into winter wonderlands, and that's where a Christmas light installation business can thrive. In this comprehensive guide, we will take you through the essential steps to start and grow your Christmas light installation business successfully. From cutting extension wires to getting customers and expanding your operations, we've got you covered.
How to Cut Your Own Extension Wire for Christmas Lights
Extension wires are the backbone of any Christmas light installation project. Here's how to cut and customize them to fit your client's needs:
a. Measure Carefully: Start by measuring the distance where you plan to install the lights. Make sure to add a few extra inches for flexibility.
b. Choose the Right Wire: Select the appropriate gauge of extension wire, considering the length and wattage of the lights. Thicker wires can handle more lights and longer distances.
c. Cut and Strip: Use a wire cutter to trim the wire to the desired length. Then, strip the insulation off the ends to expose the wires inside.
d. Connectors and Weatherproofing: Attach connectors to the stripped ends, ensuring a secure connection. Apply weatherproofing tape or sealant to protect the connections from moisture.
Types of Bulbs and Clips for Christmas Lights
When it comes to Christmas light installations, the type of bulbs and clips you choose can make a significant difference in the overall look and durability of the display.
a. Bulbs: There are various types of bulbs available, including incandescent, LED, and mini lights. LED lights are energy-efficient and last longer, making them a popular choice. Consider the color, size, and style of bulbs that will best suit your client's vision.
b. Clips: Select the right clips or fasteners to secure the lights. Common options include gutter clips, shingle clips, adhesive clips, and stake mounts. Ensure that the clips are compatible with the type of bulbs you're using and the installation surface.
How to Install Christmas Lights on Gutters
Installing Christmas lights on gutters can be a bit tricky, but with the right techniques, you can achieve a clean and professional look.
a. Clean the Gutters: Start by cleaning the gutters thoroughly to remove any debris or leaves. A clean surface will ensure better adhesion for the clips.
b. Attach Gutter Clips: Use gutter clips to secure the lights along the edge of the gutters. Make sure to space them evenly for a uniform look.
c. Route the Wire: Carefully route the extension wire along the gutters, making sure it's hidden from view as much as possible. Use additional clips to secure the wire in place.
d. Test the Lights: Before finishing the installation, test the lights to ensure they are working correctly. Replace any faulty bulbs or connections.
How to Get Customers for Your Christmas Lights Business
To establish and grow your Christmas light installation business, you'll need a solid customer base. Here's how to attract and retain clients:
a. Create a Professional Portfolio: Take high-quality photos of your past installations to showcase your work. Create an online portfolio or a printed brochure to demonstrate your expertise.
b. Online Presence: Build a user-friendly website that includes your services, pricing, contact information, and customer testimonials. Optimize your site for search engines to improve visibility.
c. Social Media Marketing: Utilize social media platforms like Instagram and Facebook to showcase your work, engage with potential clients, and run targeted ads during the holiday season.
d. Networking: Attend local events, join business associations, and network with real estate agents, event planners, and local businesses to increase your visibility.
e. Referral Program: Encourage satisfied customers to refer friends and family by offering referral discounts or incentives.
How to Grow Your Christmas Lights Business
Once your Christmas light installation business is up and running, it's time to focus on growth and scalability. Here are some strategies to expand your operations:
a. Hire Additional Staff: As demand increases, consider hiring skilled installers to help with the workload. Ensure they are trained to maintain your high-quality standards.
b. Diversify Services: Expand your services beyond residential installations. Offer commercial installations, holiday lighting for events, and even year-round outdoor lighting.
c. Geographic Expansion: If your business is thriving in one area, consider expanding to neighboring regions or cities. Research local regulations and market conditions before expanding.
d. Repeat Business: Maintain relationships with your existing customers. Offer annual maintenance packages or discounts for returning clients to secure repeat business.
e. Invest in Marketing: Allocate a portion of your profits to marketing efforts. Invest in seasonal advertising, SEO optimization, and pay-per-click advertising to reach a wider audience.
f. Streamline Operations: Implement efficient scheduling and project management software to streamline your operations and improve customer service.
Starting and growing a Christmas light installation business can be a rewarding venture, especially during the holiday season. By mastering the art of cutting extension wires, selecting the right bulbs and clips, and perfecting installation techniques, you can deliver stunning displays that bring joy to your clients. Furthermore, effective marketing strategies and a commitment to quality will help you attract and retain customers, while smart business expansion will pave the way for long-term success in this festive industry. So, put your creativity and entrepreneurial spirit to work, and let your Christmas light installation business shine bright!
What skills do I need to start a Christmas light installation business?
While no formal qualifications are required, having basic electrical knowledge, good customer service skills, and a creative eye for design will be beneficial.
How do I price my Christmas light installation services?
Consider factors such as the size of the installation, the type of lights used, labor costs, and any additional services offered. Research local competitors to set competitive pricing.
Is insurance necessary for a Christmas light installation business?
Yes, insurance is essential. Liability insurance can protect you in case of accidents, and worker's compensation insurance is crucial if you hire employees.
Do I need a special license or permit to operate this business?
Check your local regulations. In some areas, you may need a general business license or a seasonal permit to install holiday lighting.
What types of lights are most popular for Christmas light installations?
LED lights are increasingly popular due to their energy efficiency and longevity. However, the choice may vary depending on client preferences and budget.
How can I ensure the safety of my installations?
Always follow safety guidelines, secure lights properly, and use weather-resistant materials. Educate yourself and your team on safe installation practices.
How do I find reliable suppliers for lights and installation materials?
Research reputable suppliers, both online and locally. Consider factors like price, quality, and shipping options when choosing suppliers.
What's the best way to handle customer complaints or issues?
Address complaints promptly and professionally. Offer solutions or refunds as necessary to maintain a positive reputation.
How can I stand out from competitors in the Christmas light installation business?
Differentiate yourself through exceptional customer service, unique design concepts, and competitive pricing. Showcase your past work through an impressive portfolio.
Can I run this business year-round or only during the holiday season?
While the majority of business will be during the holiday season, consider offering year-round outdoor lighting services to generate income throughout the year.
Starting a Christmas light installation business can be a rewarding venture, but it's important to be well-prepared and informed to ensure your success in this niche market.
Copyright ©2025 All Right Reserved website designed by christmaslights.io
Terms of Service / Privacy Policy
Have questions or need assistance?
Contact us at (855)619-LITE